2006-08-10 05:50:18 · 9 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
AND IT IS A AUTOMATIC.
2006-08-10 06:00:35 · update #1
the only two problems you could have is the 3rd gear shift sol or the 3 gear clutches are worn out if the check eng light is on more likely it the sol.... hope this helps you out..
2006-08-10 15:30:05 · answer #1 · answered by forever down 1 · 0⤊ 0⤋
Need to know if it's an automatic or Manual Transmission.
If it's an automatic, is it 3 speed or overdrive?
Now that I know it's an automatic, is the engine light on, or the overdrive light on? If so, I could be as simple as a shift solenoid problem. But It also could have high clutches worn out inside the transmission. And depending on which transmission it is, Chevrolet had a problem with the transmission cases warping, and you'd have to replace the case.
Need more info to decifer which.
2006-08-10 06:01:40 · answer #2 · answered by michael081278 4 · 0⤊ 0⤋
has to be an electronic sensor on the transmission... I bet its automatic... which eliminates the clutch problem... try after second gear loosing the foot of the accelerator and then deaccelerate again... that might throw the gear in... it aint gonna be fixed by itself so take it to a transmission shop... might need adjustment only.
2006-08-10 06:01:48 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Transmission modulator malfunction or a loose vaccuum line to it. Unless it is electronically controlled, then it would be a PCM (powertrain control module) or a VSS (vehicle speed sensor)problem, or a loose connection.
2006-08-10 06:57:27 · answer #4 · answered by Anonymous · 0⤊ 0⤋
that's beacause your derailleur (the mechansm that strikes to alter the gears) isn't top located. so as to repair this, you will could lossen the screw attaching the derailleur to the cable. after this, you the two could pull/tightnen or lossen the cable to its perfect length. then, screw the bolt back in, with the cable below it, and it could have the means to alter gears back. yet, do no longer think of that's hassle-free, adjusting the cable is an exceptionally annoying element to do, you are able to could regulate many cases formerly you get your perfect placing.
2016-11-04 07:12:39 · answer #5 · answered by ? 4 · 0⤊ 0⤋
Your clutch is probably going bad or you have ground the gear shift down..
2006-08-10 05:55:42 · answer #6 · answered by Anonymous · 0⤊ 0⤋
sounds like 3rd gear is stuck or out
transmission repair shops can fix this
2006-08-10 05:56:33 · answer #7 · answered by Anonymous · 0⤊ 0⤋
$100 says its your synchronizer gear.
2006-08-10 05:57:56 · answer #8 · answered by Hando C 4 · 0⤊ 0⤋
my be you would want to take it to a mechanic! most likely he will be able to tell you what is wrong!
2006-08-10 05:55:37 · answer #9 · answered by Anonymous · 0⤊ 0⤋