2006-08-09 15:41:00 · 7 answers · asked by john s 1 in Cars & Transportation ➔ Maintenance & Repairs
Motor flush solution or mineral spirits mixed 3/4 with oil
2006-08-09 15:45:33 · answer #1 · answered by Anonymous · 0⤊ 1⤋
Why? you need NO flushes what so ever to clean out dirty oil..... a little dirty oil each oil change is NOT gonna cause any difference either way...
Now to clean out a sludged engine.... use at your own risk, most quick flushes are kerosene, if they break huge chunks lose..... may clog the oil pump pickup screen. Btw, trans fluid does nothing to clean a engine, has barely any additives or detergents.....
Bit burger...... ANY oil, will remove oil...., not to sound rude but that 's common sense... I could use spray lube to clean my hands...., and as for transmissions being clean...... well they don't have to deal with fuel, water, and combustion byproducts do they? wow, dumbass...... what are we? like 5? use some manners, you did not have to respond in such a rude manner...., any oil, will cut oil.... simple as that...., and transmissions DO NOT have to deal with the same conditions a transmission must deal with.....
2006-08-10 03:17:35 · answer #2 · answered by 572ci. 5 · 1⤊ 0⤋
I use a can of mystery oil. Just like the old timers used too. Put one can in and let it run for about 10 minutes. But be cafefull. When you loosen up a really dirty engine it could clog up drain hole in your heads. When your done running it through your engine. Take off the rocker cover/ or covers and make sure the the drain hole's are clear. Be carefull cleaning them out. Don't put anything in the holes that will drop through or caese more problems for you. Take care and good luck.
2006-08-09 22:50:33 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Not a lot of info given here, but you can safely add a quart of trans fluid then run 15-20 minutes then change the oil, it will help clean a dirty engine.
2006-08-09 22:50:17 · answer #4 · answered by Vince J 5 · 0⤊ 0⤋
I beg to differ on the AT fluid. It is an excellent degreaser and will clean off carbon deposits.
Next time your hands are very greasy, wipe a little of it on there.
Ever see an auto transmission with dirty build up on the inside?
I have refilled motors with all AT fluid, then drained and filled with oil.
You are a dumbass, 572.
2006-08-10 05:11:18 · answer #5 · answered by Anonymous · 0⤊ 1⤋
ok to flush it you need wynns oil treatment..you put it in the crank case and let it run for approximately 5 minutes..then you drain the oil..change your filter..top it up with oil and add wynns oil conditioner to make sure the seals are not damaged...
2006-08-09 22:46:40 · answer #6 · answered by iusedtohavehair 3 · 0⤊ 0⤋
motor flush you can pick it up in advance or auto zone
2006-08-09 22:43:57 · answer #7 · answered by cwb63ss 6 · 0⤊ 0⤋