i am working on a 1953 kaiser car it has auto trans i cannot get the converter out of the trans why?

0 ⤊

i am working on a 1953 kaiser car it has auto trans i cannot get the converter out of the trans why?

2006-08-09 05:32:20 · 3 answers · asked by ed c 1 in Cars & Transportation ➔ Maintenance & Repairs

3 answers

more than likely, the front pump bushing has spun and is welded to the snout on the torque converter. I run into that all the time. Was it leaking out the front of the transmission before you took it out? In any case, this is how I remove them when there stuck like that. Take 2 large prying objects and pry back and forth and walk the converter and bushing out of the pump. Takes a little time, but normally comes right out.

2006-08-09 06:33:14 · answer #1 · answered by michael081278 4 · 0⤊ 0⤋

it has a two stage insertion. to remove it, pull out then up and out again.

2006-08-09 12:37:12 · answer #2 · answered by duc602 7 · 0⤊ 0⤋

Apparently, you don't know what you are doing.

2006-08-09 12:36:30 · answer #3 · answered by echiasso 3 · 0⤊ 0⤋