English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My inside driver door power lock button doesn't lock OR un-lock any of the doors - the passenger side power lock works but the driver side does not. Any ideas????

2006-08-08 06:46:32 · 7 answers · asked by boricqua_mami 2 in Cars & Transportation Maintenance & Repairs

7 answers

bad switch, plain and simple. about 200 bucks for the repair on the high side. you can get one from a import junk yard and someone can install it for 50 bucks depending on labor in your area. i should also add that it might have come unhooked as well

2006-08-08 13:33:45 · answer #1 · answered by Christian 7 · 0 0

It want in straightforward words value you a at the same time as and exertions. it truly is a job you're able to do your self. bypass to a self serve wrecking backyard and pull one out of any Honda that has a lock like yours. The section/s you want from there are $10 or a lot less. The locksmith will be about $20 to make a clean key. a keep will value about $80 in accordance to hour and quote for 4 hours. they are going to insist on new section/s from the broking service at ridiculous expenditures. it truly is a hardship yet you're able to do it. you're able to even replace the total door finished (a lot less paint matching) for a options decrease than keep expenditures.

2016-11-23 16:10:32 · answer #2 · answered by behrendt 4 · 0 0

well take the button out and clean it with wd-40 and the terminal and try it. and also check if there is current running to the door lock on the driver side. if there is current the button is bad. replace it.

2006-08-13 15:32:05 · answer #3 · answered by ISRAEL R 2 · 0 0

replace switch assembly on the driver side if not that there is a module in the door that makes it to where you have to lock with key or remote replace that module also plug could have come undone from switch

2006-08-14 15:47:13 · answer #4 · answered by Silvertooth 2 · 0 0

replace the driver door master switch. Easy to replace,just pull on the switch and unplug and replace. It's all snapped in,no screws or anything.

2006-08-13 15:59:12 · answer #5 · answered by FORDever 4 · 0 0

Has the switch in the door come lose. take the door panel off and reconnect it. this might save a trip to a shop.

2006-08-16 02:57:53 · answer #6 · answered by mgiltz 2 · 0 0

sounds like you need to replace the switch or repair wiring behind the switch

2006-08-16 04:18:16 · answer #7 · answered by Norman 7 · 0 0

fedest.com, questions and answers