It only has a centre stand at the moment. I bought it new.
2006-08-08 01:45:55 · 5 answers · asked by Fluorescent 4 in Cars & Transportation ➔ Motorcycles
Yes ask at your local breakers for a pair of footpegs with side stand.
thier is four 12mm bolts holding your footpegs onto the bottom of the engine and the replacement ones will fit easily.
Make sure that when you fit the replacement ones that the bolts arnt loose or over tight!.The engine casings are aluminium
Most old Cg125s.. Brazil (aprox 1992)models etc, have the sidestand as standard.
I have fitted these footpegs to Cb100n's , which normally dont have a sidestand
My freinds cb125s i have fitted these footpegs and i paid £15 from a breakers, although you may find some on ebay.
2006-08-08 13:32:55 · answer #1 · answered by robynbiker 5 · 1⤊ 0⤋
Yes.
Asian models / version comes with dual stand. (Main Stand and Side stand). I used to ride one myself a couple of years back.
The main shaft / bolt from the main stand can accomodate the side stand.
Check with authourised Honda Dealer, Ask for the Technical Specification Diagram.
Regards.
Singapore.
2006-08-08 12:41:13 · answer #2 · answered by isz_rossi 3 · 0⤊ 0⤋
why would you want to they are dead easy to get on and off the centre stand
2006-08-08 13:14:01 · answer #3 · answered by honeypot 3 · 0⤊ 0⤋
yes , it is...
mite be easier if u took it to a dealer and got them to fit it
2006-08-08 08:54:12 · answer #4 · answered by Pat 4 · 0⤊ 0⤋
I think so.
2006-08-08 08:49:48 · answer #5 · answered by Anry 7 · 0⤊ 0⤋