2006-08-07 04:10:19 · 6 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
The walls were never finished meaning the seams where never taped. They were jsut left alone. I want to tape the seems so they will not be visable anymore.
2006-08-07 04:30:34 · update #1
What seams would i be talking about if I am renovating a kitchen and I am talking about drywall? Come on!
2006-08-07 04:52:02 · update #2
get joint compound ready mixed for about $5 a bucket. joint tape in either paper or sticky tape. put down a bed of compound then emerse the tape then add a little more over the tape. Get it as close to perfect flat as you can to minimize sanding which gets into EVERYTHING. when it drys run a flat 4 in putty knife over it to knock off any high spots. very little sanding, use a vacuum if you can. then another coat. when your happy use primer sealer to seal it or else it will suck up all your paint.
2006-08-07 05:31:00 · answer #1 · answered by zocko 5 · 0⤊ 0⤋
Are you talkingabout drywall seams? You need to be more specific. There is drywall tape on the market of course, but that job usually requires a professional unless you really know what you're doing and can finish the process without any seams or tape showing through.
2006-08-07 11:42:49 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I think you can go to a hardware store and get that kind of tape to seal the seams.
2006-08-07 12:06:28 · answer #3 · answered by chickadee_ajm 4 · 0⤊ 0⤋
I`m not sure what seams your talking about, but you can buy painters tape at any place that sells paint.
Good Luck
2006-08-07 11:17:53 · answer #4 · answered by Sandra♥ 5 · 0⤊ 0⤋
The seams of what? Are you talking about drywall?
2006-08-07 11:16:31 · answer #5 · answered by Michael K 3 · 0⤊ 0⤋
need more info
2006-08-07 11:26:57 · answer #6 · answered by bigg_dogg44 6 · 0⤊ 0⤋