English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Pls help me for "Memory card".?

Well, I have a memory DDR installed on my PC but I want to get that inside the CPU but how? becoz I want to bring that as a sample in the store to buy another memory card with the same speed on it. Im just curious on how to get that Memory card on the CPU intself. Pls help. thnx in advance.

2006-08-07 04:02:55 · 7 answers · asked by brian_chris 1 in Computers & Internet Other - Computers

Im just scared to pull that memory card on the case ( like short circuit or ruin the electrical wiring inside on the CPU). I dont know, pls help. ;)

2006-08-07 04:15:42 · update #1

7 answers

1st, the RAM stick doesn't go on the CPU, it goes on the motherboard. find screws on the case of your computer, and open them. there should be at least 1 stick placed coming out. Remember where it was. you have to make sure the speed and frequency of the card are the same as the old one.

2006-08-07 04:12:18 · answer #1 · answered by !{¤©¤}! 4 · 3 2

Sounds like you are asking how to remove a memory stick from your PC.
With the PC off and unplugged, open the lid
Look for the memory stick(s)
Should be held in by a little (usually white) clip on each end
Gently push the clips out until the memory stick pops loose

To install the new memory, place it in the memory slot.
Make sure the little groove in the bottom of the memory stick lines up with the bump in the slot.
Gently push into place
Close the two little clips

2006-08-07 04:10:17 · answer #2 · answered by dewcoons 7 · 0 0

It just slots into the motherboard and easy to remove and replace it isn't attached to the cpu it's attached to the motherboard it's easy to identify compared to everything else it's long and thin lol take a look at this site just so you know what you are looking for

2006-08-07 04:10:12 · answer #3 · answered by Sarah Piggy 3 · 0 0

hello friend . its so easy a work to do. just remove the side case of ur cpu cabinet and check for a rectangular card inserted in the motherboard. it will have two pins on either ends of it. just move them or loosen them and remove the RAM from the socket. thats all.

2006-08-07 04:11:07 · answer #4 · answered by harsha varma 2 · 0 0

Just open up the case and take it out it is easy to do and put back in.

2006-08-07 04:06:52 · answer #5 · answered by Izzy Blu 1 · 0 0

homestead windows recommend a minimum 512mb ram for use homestead windows XP errors unfastened. Your RAM 448 MB can assist you in basic terms 256MB to homestead windows this is insuffient for xp. i think of you have put in 3 RAM into your computing gadget. you may desire to be 256MB,128MB and 64MB that isn't help. attempt installation a single RAM for 512MB or 1GB will carry out extra useful for you for extra regulations

2016-11-04 01:39:37 · answer #6 · answered by ? 4 · 0 0

just open your case and take out and but it again

2006-08-07 04:10:02 · answer #7 · answered by matrex13 2 · 0 0

fedest.com, questions and answers