looks like you do but there has to be an easier way
2006-08-05 15:38:22 · 6 answers · asked by yam_1100 1 in Cars & Transportation ➔ Maintenance & Repairs
Yes you do heres the details .Remove the following components.
The engine mounting bracket lower nut.
The engine mounting bracket lower stud.
The engine mounting bracket lower spacer.
Remove the belt.
INSTALLATION
Install the belt. Refer to Engine Mount in order to install the following components:
The engine mounting bracket lower nut.
The engine mounting bracket lower stud.
The engine mounting bracket lower spacer.
2006-08-05 15:43:46 · answer #1 · answered by les 3 · 0⤊ 0⤋
Use a hand jack under the oil pan, take the bolts out of the side mount and lift up with the hand jack enough to slide the belt through the mount. This is how we do it on the impala and other vehicles like it, I'm not sure if your mount is the same but if its a side mount you can support the motor with a hand jack then remove the bolts and jack it up enough to slide the old belt out and new belt in.
Good luck ...
2006-08-05 15:44:34 · answer #2 · answered by grande alacrán 5 · 0⤊ 0⤋
When you try to take the old belt out you will answer your own question.
2006-08-05 15:53:32 · answer #3 · answered by mark o 3 · 0⤊ 0⤋
depends on what type of buick. Riviera yes most others no.
2006-08-06 12:29:46 · answer #4 · answered by rwings8215 5 · 0⤊ 0⤋
yes
2006-08-05 15:46:02 · answer #5 · answered by chillin 2 · 0⤊ 0⤋
No
2006-08-05 15:42:58 · answer #6 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋