The door handle on this car is up on the window--well...it has broke! Can't get in the car on this side, have to slide across the front seat from the passenger side. Does anyone know how much money we are looking at to get it repaired? And is it a difficult process to fix?
2006-08-05 03:15:02 · 8 answers · asked by oceanwaves 1 in Cars & Transportation ➔ Car Makes ➔ Pontiac
you can change it yourself with simple hand tools and the part isnt cheap new about 100 bucks is right but try used first, i had both handles break on my olds, same parts, within a week, thankfully i got cost on parts because i was a mechanic for an olds dealer
2006-08-05 08:35:57 · answer #1 · answered by Christian 7 · 0⤊ 0⤋
you could attempt the suspicious coil with a volt/ohmmeter fairly particularly to make certain. Set the type to the optimal resistance obtainable then touch the attempt probes first to the two extreme voltage spark plug connections. in case you get a examining it is sturdy; if there is not any substitute in the reveal it is undesirable (burned out). Now turn the coil over and attempt the low-voltage terminals on the returned; returned, if voltage flows it is effective, and if the resistance examining does not substitute, it is undesirable. ultimately touch one probe to the two extreme voltage plug terminal and the different probe to the two between the low voltage usual terminals. There could desire to be no voltage bypass in any respect; if there is the coil is undesirable (shorted). BTW: while performing those exams it is important which you do not touch the metallic information of the probes! Doing so could reason fake advantageous readings.
2016-11-03 22:52:39 · answer #2 · answered by Anonymous · 0⤊ 0⤋
It looks like about $100.00 for a new handle assembly from a pontiac dealer. (It may be cheaper if it is available aftermarket from somewhere like auto zone)
The flat rate gives 3 tenths of an hour for installation. ($15.00 - $20.00)
They aren't hard to install, most do-it yourselfers can do it easily with a screwdriver and a 10mm wrench.
2006-08-05 03:29:46 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If you take it to a dealer probably about $300
2006-08-05 03:19:16 · answer #4 · answered by Anonymous · 0⤊ 0⤋
find a garage type mechanic and he'll probably do it for less than 100 bucks
2006-08-05 03:20:35 · answer #5 · answered by trump 2 · 0⤊ 0⤋
what grand prix?i tell ya u r one stupid thing of a useless cadre
2006-08-05 03:19:50 · answer #6 · answered by catty 4 · 0⤊ 0⤋
My car's better than your car! (rental)
2006-08-05 03:19:14 · answer #7 · answered by Anonymous · 0⤊ 0⤋
notthatbad/about100.00/dollars
2006-08-05 03:25:19 · answer #8 · answered by blackbutton100 4 · 0⤊ 0⤋