he has replaced the flasher , but the turn signals only light up they do not flash, and he has also put in a new battery. Any help would be appreciated.
2006-08-04 13:22:47 · 5 answers · asked by hamlindfp 1 in Cars & Transportation ➔ Motorcycles
Have him replace the bulbs... one of them is defective, or the socket is corroded and not allowing current to flow to the bulb..
2006-08-04 13:26:28 · answer #1 · answered by J.D. 6 · 0⤊ 0⤋
The switch feeds the power to the flasher then on to the bulb somehow it's getting around it.
2006-08-04 14:15:01 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Always give year, make, engine size and model # when asking questions. The 1980 model had a 6 volt system. Other years used 12 volts.
12 volt bulbs in a 6 volt system will cause this.
2006-08-04 14:32:46 · answer #3 · answered by guardrailjim 7 · 0⤊ 0⤋
Recheck wiring to make sure hot interrupted by flasher unit, it is not bypassed. New flasher may be defective.
2006-08-04 14:42:56 · answer #4 · answered by helixburger 6 · 0⤊ 0⤋
try the fuses
2006-08-04 13:27:00 · answer #5 · answered by nightsky1331 3 · 0⤊ 0⤋