2006-08-04 10:11:53 · 20 answers · asked by larbec1 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Maybe you should service engine soon and it might just got off itself
2006-08-04 10:15:56 · answer #1 · answered by dbrady 5 · 0⤊ 1⤋
1997 Chevrolet Silverado
2016-11-07 05:18:21 · answer #2 · answered by duperne 4 · 0⤊ 0⤋
go to an Autozone and tell them you service engine soon light is on. They'll do a diagnostic check for free and tell you what your problem is and how to fix it. Ask them to clear the trouble code, which is basically telling the car that there is nothing wrong and the service engine soon light will turn off for a day or 2 while you fix the problem. Most likely its not a major problem just a sensor that went out somewhere so it wont cost u much to fix it. I'm 99% sure of it
2006-08-04 10:23:09 · answer #3 · answered by R2 2 · 0⤊ 0⤋
Go to a parts store and they will pull the codes for you. This will tell you what you need to repair the vehicle. To delete the code you must use a hand held diagnostic tool to reset them. Get those codes before you erase them or you might wish you had of!! Good Luck! If you put the switch in the on position and remove the battery cable, you stand a good chance of blowing out the computer. DO NOT DO THIS! For the ford man, you need to check your statement about the #1 selling vehicle. News flash! They are not #1 and they are on the verge of bankruptcy. Gee I wonder why? HA HA!
2006-08-05 01:24:31 · answer #4 · answered by Anonymous · 0⤊ 0⤋
the service engine light is on for a reason the problem needs to be fixed as this can do harm to your motor
you can't just unhook the battery cable and expect the obd2 code to go away that is on obd1 systems 1995 and older go to autozone and have them pull the codes and tell you whats wrong but he cant erase the codes ( its a liability thing) but u can ask him if u can erase the codes
2006-08-04 19:20:38 · answer #5 · answered by colter_bay 2 · 0⤊ 0⤋
there is three ways 1= go to a auto shop they can hook up a comp. an turn it off 2= is unhook batt. for ten min. 3= is tighten gas cap till it click several times i have a 2002 chev if i dont turn the cap that way mine well come on to an have take the shop so they can put on comp. an turn it off something tells the comp in your truck u have a vacum lose an it triggers the lite to come on
2006-08-04 10:23:54 · answer #6 · answered by max 1 · 0⤊ 0⤋
turn on the ignition key to the on (not start) position. Pump the gas pedal to the floor 3 times within 5 seconds. Turn key off. Light will go off
2006-08-04 10:15:16 · answer #7 · answered by bobsled 5 · 1⤊ 0⤋
When the problem that made the light come on is fixed, unplug the battery for 1 minute. the computer will reset and the light will come off.
2006-08-04 10:15:41 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Take it to a Chevrolet Dealer and have them diagnose & fix the problem.
2006-08-04 10:26:48 · answer #9 · answered by ubet426 4 · 0⤊ 1⤋
If you just want to turn it off, disconnect the battery cable, but that wont fix the problem
2006-08-04 10:15:52 · answer #10 · answered by Anonymous · 0⤊ 0⤋