"Unloosen" means to tighten, and in most cases you do that by turning it clockwise.
For some obscure Orwellian reason, you would unloosen the fittings to a propane tank on a gas grill by turning it counterclockwise, which has nearly caused me on a couple of occasions to blow myself up when I tried to unloosen it by turning it clockwise.
2006-08-03 11:08:00
·
answer #1
·
answered by Kokopelli 7
·
12⤊
1⤋
Put the tip of your driver in screw slot apply light pressure and turn it clockwise. If it refuses to unloosen then it's probably striped. You will need to get a new screw. If the hole is stripped you will need to get a screw that is about 1/16th bigger round than the screw that will not unloosen. Or you can drill the hole out and use a screw appropriate to the new hole size.
2006-08-03 11:11:50
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
Well unloosen, so tighten, so lefty loosie, righty tighty. Unless it is a revervse thread and therefore, SOL, disregard and call a plumber, engineer, an architect. Then call a lawyer, becuase someone will screw up. HAHAHAHAHAHAHAHAHA
2006-08-03 11:18:53
·
answer #3
·
answered by robling_dwrdesign 5
·
0⤊
0⤋
easily by turning to the left to loosen. However if it still stuck and will not move try hitting the screwdriver handle with a hammer while the bottom part is in the screw in order to loosen the screw and then try turning the screw to the left. Good Luck hope it works, I have some that I am still unable to loosen.
2006-08-03 11:16:35
·
answer #4
·
answered by pooterilgatto 7
·
0⤊
0⤋
I grew up in an extraordinarily small city and severe college exchange into have been each and all of the interest exchange into different than for paying for decrease than the impact of alcohol and making out. I even did a number of that throughout college. LOL that's annoying to believe I survived severe college and that i exchange into an "A" student. college is have been females have been and have been I performed soccer so I had a blast. It did no longer harm that by using the time i began out severe college my Dad had provide up ingesting (He exchange into between the worst alcoholics I even have ever seen) . mom exchange into nonetheless a discomfort yet Dad and that i grew to become maximum suitable acquaintances, So i assume my view of my severe college years is a touch biased. the college Dances have been massive activities in a small city that had one action picture tutor with purely one exhibit screen, no quickly food eating places and no department stores. We did no longer get Rock stay shows coming interior of one hundred fifty miles so i did no longer see my first stay stay overall performance till I went away to college till you count variety community bands enjoying on the Dances.
2016-10-01 10:51:00
·
answer #5
·
answered by albury 4
·
0⤊
0⤋
Take your screwdriver and place it in the top of the screw and turn it counter clockwise to loosen it. To unloosen it, that is to make it tighter, turn it clockwise.
2006-08-03 10:56:17
·
answer #6
·
answered by ramall1to 5
·
0⤊
0⤋
righty- tighty ( right to tighten )
lefty -loosy. ( left to loosen )
2006-08-03 10:54:33
·
answer #7
·
answered by biz owner 3
·
0⤊
0⤋
Yes!!
2006-08-03 10:56:39
·
answer #8
·
answered by sid_avatar 2
·
0⤊
0⤋
RIGHTY TIGHTY LEFTY LOOSY
2006-08-03 10:53:56
·
answer #9
·
answered by b 2
·
0⤊
0⤋
righty, tighty
lefty, loosey
2006-08-03 10:56:34
·
answer #10
·
answered by Pushy Buttafly 2
·
0⤊
0⤋