When I am trying to pull a skier and I punch the motor it seems to hesitate for one to two seconds before gaining full power, is this normal?
2006-08-02 06:37:59 · 9 answers · asked by mdgreen1260 1 in Cars & Transportation ➔ Boats & Boating
Outboard or inboard? Carb or EFI. A hesitation is usually a lean fuel condition. Knowing what you have can get us moving it the correct direction.
2006-08-02 06:43:14 · answer #1 · answered by Mercman 4 · 0⤊ 0⤋
If you are running an inboard or inboard out board the problem is you need a carb job. If it's a outboard depending on model year etc. itstill comes back to not eneogh gas when accelerating. Have it reset.
2006-08-02 23:54:50 · answer #2 · answered by Wayne A 2 · 0⤊ 0⤋
Adjust or replace the accelerator pump in the carb.
It gives an extra squirt of fule when you punch it.
2006-08-02 15:53:30 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Maybe the advance on the electrical could be hesitating. Could be in the timing.
2006-08-02 13:46:49 · answer #4 · answered by Anonymous · 0⤊ 0⤋
If you punched me I would hesitate too.
(((smile)))
2006-08-02 13:42:55 · answer #5 · answered by Mr Bingo 4 · 0⤊ 0⤋
same thing used to happen to my 1973 ford torino and it was the carb. and the throttle cable was loose
2006-08-02 15:39:30 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Maybe you just need a new boat.
2006-08-02 17:44:11 · answer #7 · answered by Melissa M 1 · 0⤊ 0⤋
nope
2006-08-06 10:33:28 · answer #8 · answered by jyd9999 6 · 0⤊ 0⤋
no you have to adjust your carburator
2006-08-02 13:41:52 · answer #9 · answered by cwb63ss 6 · 0⤊ 0⤋