Okay.., my table fan is not working when I switch on. Any idea how to fix it? 10 points, remember!
2006-08-01 23:15:57 · 9 answers · asked by kate lee 3 in Home & Garden ➔ Maintenance & Repairs
If you can then follow the following steps:
1) Open all the screws of your table fan and remember all the places from where you have opened it.
2) Then just connect the same coloured wires which are looking as if they are broken down due to some short circuit.
3) At last tight all the screws which you have opened.
'OR'
You can call the electrician.
2006-08-01 23:27:13 · answer #1 · answered by Deepankar Dey 2 · 1⤊ 1⤋
Table Fan Working
2017-01-17 19:45:50 · answer #2 · answered by ? 4 · 0⤊ 0⤋
First check your table fan plug top , check the fuse ,and the wire are connected properly.
If all this are OK fix the plug to your AC socket and switch on the fan and also check if there is any timer.Still not working pls call the serviceman Might need servicing and greasing.
2006-08-01 23:25:52 · answer #3 · answered by Gamarays 2 · 0⤊ 0⤋
If it is plugged in and still wont work and you dont know anything about electricity I would suggest you go to Walmart. I saw table fans on sale there for $7.00. It would cost you more to pay an electrician to fix your old fan. m
2006-08-01 23:30:58 · answer #4 · answered by Mache 6 · 0⤊ 0⤋
ok i just fixed a fan at work by spraying the bearing behind the fan blade i twisted the fan in reverse to unscrew it then squrited some spray silicone into the bearing area and put blade back on and spun it which freed up the bearing and it worked. ....goood luck...mike
2006-08-02 00:56:31 · answer #5 · answered by motox 4 · 0⤊ 0⤋
turn it [does it hum?] on & try to get the blade started with a push [whatever u can get on blade to move it]. maybe you need to jiggle the switch ?[does it hum?] if u cant get it to hum, trash it.
does the fan take oil, old fans did have 2 holes on top in front & back of the motor & guess what u're supposed to do to the oilholes?. if it runs try to run it upside down for a while.
that sucker has another life in it if u can run it upside down. something to do with gravity wear & tear. good luck.
2006-08-02 00:57:39 · answer #6 · answered by enord 5 · 0⤊ 0⤋
table fans are cheap just go and buy another one
if you cant do that try throwing it against the wall and kicking it some times that will work lol
2006-08-01 23:50:20 · answer #7 · answered by KILLEMALL 2 · 0⤊ 0⤋
since yr not an electrician, call one, dont play with electricity, it shocks,
2006-08-01 23:21:09 · answer #8 · answered by dereckdsouza 3 · 0⤊ 0⤋
plug it in, Lol
2006-08-01 23:18:52 · answer #9 · answered by Milosenpotion 4 · 0⤊ 0⤋