Do I really need to hire a professional to install my new gas range? I really think I can do it by myself but my friends tell me to leave it to the pros. How hard is it to install a new gas range?
2006-08-01 23:08:23 · 12 answers · asked by Skeebee 1 in Home & Garden ➔ Do It Yourself (DIY)
Never ever attempt to do it by yourself, please. Such things need an expert to intall them in accordance with the safety codes and regulations.
2006-08-01 23:13:46 · answer #1 · answered by Anonymous · 1⤊ 8⤋
Gas Range Installation
2016-09-28 06:35:38 · answer #2 · answered by ? 4 · 0⤊ 0⤋
This Site Might Help You.
RE:
Is it okay to install a new gas range without hiring a professional?
Do I really need to hire a professional to install my new gas range? I really think I can do it by myself but my friends tell me to leave it to the pros. How hard is it to install a new gas range?
2015-08-18 08:29:45 · answer #3 · answered by ? 1 · 0⤊ 0⤋
The guy who said to shut off the gas at the meter forgot to mention that this will presumably also shut off the pilot light for your water heater, and possibly your furnace - if they have pilot lights. If I'm wrong on that, someone can correct me. Those may need to be manually relit. There are YouTube videos on relighting them.
I'm not sure why it wouldn't be sufficient to use only the shutoff for the range, but I don't have the expertise to offer an opinion on that.
2014-04-15 03:00:13 · answer #4 · answered by John T 2 · 0⤊ 0⤋
NO!!! Do n ot do it yourself you could blow yourself to eternity and back!!
Hire a professional at once.
Be aware that most local codes require a licensed and certified gas professional to install a gas unit. When you buy a freestanding electric range or an electric cooktop, you'll need a dedicated 240-volt outlet, and the assistance of an electrician. If you're eyeing a dual-fuel-cooking appliance, you'll need both gas and a dedicated 240-volt outlet.
Go to bestbuy.com and read up on their ranges and installation- will give you an idea of what is required.
Hugs,
CeaCea
2006-08-02 02:33:58 · answer #5 · answered by ceaceagogo 3 · 1⤊ 6⤋
1
2017-01-27 23:01:41 · answer #6 · answered by ? 3 · 0⤊ 0⤋
Call a professional!
2014-07-30 07:38:39 · answer #7 · answered by bob 1 · 0⤊ 0⤋
you should have a NEW flex pipe. turn off gas. ask the HW guy what kind of teflon to use when you buy your NEW pipe. They may even recommend somebody to do it for you. when you turn it back on stick your nose in there to smell for gas then use the dish soap trick look for bubbles. if any doubt get help. the shut off is right at the wall.
2006-08-02 02:24:42 · answer #8 · answered by zocko 5 · 2⤊ 1⤋
Pay attention.....All other answers were given by idiots. You absolutely CAN do it yourself and here is how: The first thing you do is shut the gas off at the meter. This will be in your basement. On the front of the meter towards the bottom, you will see the shut-off knob. You will need a wrench to turn it. You cannot do it by hand. After doing this, turn one of the burners on your range on and watch the flames eventually die away (should only take a minute or so). That's how you'll know the gas has been definitely shut off. Next, you pull the range out away from the wall so you can get to the gas connection. Shut the valve off that is attached to the rigid pipe that is coming out of your wall. With an adjustable wrench, remove the flexible hose attached to your range from the rigid gas pipe coming out of your wall. You will need to replace the flexible hose when you put your new range in. Do not use the old one. Also, when you buy the new hose, make sure you get the right sized one. Some have 1/2 inch connections on each end, others have 1/2 inch on one side and 3/4 inch on the other, etc. So make sure you get the right one.
Before you make any connections, wipe off the threads on the pipe coming out of your wall cause they will be dirty from the previous connection. The threads need to be clean. Run a rag around them a few times to remove any tiny bits of dirt or grit you see. Then connect the flexible hose first to your range and then to the wall. Use Pipe Dope on each of these connections. Do not use teflon tape........ use PIPE DOPE (it's a creamy pipe connection sealer that usually comes in a small tube). You apply it to the threads before making the connection. After you've made the connections and before you put your range back in place, open all the windows. Go to your basement and turn the gas on. You will here a "swoosh" when you do this cause of the built up pressure, so don't get frightened. Then turn the valve on that is attached to the rigid pipe coming out of the wall by the range. Wet a sponge in soapy water and wet the connections you just made. If there are leaks, you will see little bubbles being formed at the connections. If everything looks ok, turn one of the burners on. Everything look ok? Good.. you're in business. Put the range back in place and start cooking.
2006-08-02 02:51:10 · answer #9 · answered by Anonymous · 20⤊ 5⤋
Contact the place you purchased the range because hookup is usually included when delivered. If you must do it yourself make sure gas is turned off,--rap the end of the gas pipe with Teflon tape clockwise, then rap pipe on the back of stove. Screw the ends of the flexible pipe on tight.-turn gas on-- pour a little dish liquid over the ends that you screwed on.IF YOU SEE any bubbles or smell gas.TURN GAS OFF --then call a professional PS --NO SMOKING.
2006-08-01 23:55:17 · answer #10 · answered by Anonymous · 0⤊ 5⤋
Listen to the guy who said you CAN do it yourself. This isn't rocket science. Moreover, if you hook it up improperly, you will instantly smell the gas.
2014-03-31 19:52:02 · answer #11 · answered by John S 2 · 2⤊ 0⤋