2006-08-01 17:40:55 · 6 answers · asked by April 1 in Computers & Internet ➔ Hardware ➔ Desktops
The step by step procedure differs based on the make and model of your case. It's very easy to do. Just remember the steps taken to remove the existing power supply and reverse them to insert the new one. If not, contact your computer manufacturers web page for detailed instructions.
2006-08-01 17:45:50 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If you want to replace the power supply first disconnect all the wire from the Mother Board.Then unscrew the old power supply our of the case. Then screw the new one at the same place. Then plug all the wire back in place.
2006-08-01 18:28:40 · answer #2 · answered by Flash 1 · 0⤊ 0⤋
Firstly disconnect the main powersupply then open the cabinet using a screw driver or what ever is necessary.disconnect the power connectors of motherboard,cddrive,harddisk,FDD & any other connections.Then remove the smps connect the new smps& connect back all the power connector back to there belongings.
2006-08-01 17:55:54 · answer #3 · answered by santhosh 3 · 0⤊ 0⤋
mine was simple pull the old one out connect it to the plug put cover back on
2006-08-01 17:46:19 · answer #4 · answered by steamroller98439 6 · 0⤊ 0⤋
dont it will make u pay and if u have a yhaoo add travismogene
2006-08-01 17:57:33 · answer #5 · answered by travis m 1 · 0⤊ 0⤋
read the manual
2006-08-01 21:22:44 · answer #6 · answered by kim_rukawa11 3 · 0⤊ 0⤋