2006-08-01 11:32:29 · 13 answers · asked by cole s 1 in Computers & Internet ➔ Hardware ➔ Desktops
Usually it fries if there is power to it.
If there was no power to it there is a small chance you can let it dry completely (will usually take several days) and it MAY work again but it's a longshot.
2006-08-01 11:51:43 · answer #1 · answered by Jim R 5 · 0⤊ 0⤋
Wet Motherboard
2017-01-13 19:58:20 · answer #2 · answered by pittard 4 · 0⤊ 0⤋
As with most electronic equipment, as long as there was no power to it when it got wet and none since, dry it completely (use a blowdryer and let it sit in a dry enviornment for several days). As long as nothing has corroded or still has moister in it it should work fine. I would try to use an old drive and a live CD to avoid frying the HDD if ther is in fact damage to the board.
good luck
2006-08-01 13:34:21 · answer #3 · answered by Adam Z 2 · 0⤊ 0⤋
Put it away in a cupboard for six months. If you are really lucky after that it will work again.
2006-08-01 12:40:50 · answer #4 · answered by john b 5 · 0⤊ 0⤋
if it is working id not bother with it ..if u havent turned it on yet ...dry it off with forced air or maybe a blow dryer...then try it ....man that sucks
2006-08-01 12:33:21 · answer #5 · answered by Gypsysoul 3 · 0⤊ 0⤋
just let it dry thoroughly(blow dry it or it might rust) and dont open it while it's still wet if you do... its fried...
2006-08-01 13:31:32 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Ouch she's fried lol
2006-08-01 13:57:00 · answer #7 · answered by technigalnz 2 · 0⤊ 0⤋
Fried...
2006-08-01 11:37:58 · answer #8 · answered by Mike L 1 · 0⤊ 0⤋
Your computer is no more, dead, gone, vinito....time to get a new computer
2006-08-01 12:37:04 · answer #9 · answered by Anonymous · 0⤊ 0⤋
time for a new computer!
2006-08-01 11:36:35 · answer #10 · answered by Mimi H 1 · 0⤊ 1⤋