Is there a website that will help me fix my leaky tub knob?

Question

I have a hot water knob in a bathtub that will not stop leaking. It is causing the actual spout to leak also. Is there a do it yourself link that will help me fix it? I can find tons of sites that help you fix a leaky sink or tub spout, but none of them say a WORD about the knob.

Answer 1

Hot water knobs frequently need repairs.
It's not that hard to do.
First turn off the water (there is usually a cut off near the water heater) and bleed off the pressure.
Second remove the knob from the stem (this is sometimes hard to do because of corrosion) there is a tool that may help at the hardware store.
Third remove the entire stem assembly (you may have to use a closet wrench is it is too deep in the wall)
Fourth look inside the body at the bottom at the seat. If it is pitted then it needs to be replaced. (yes there is another tool for this it's called a valve seat remover)
Fifth take the whole stem down to the hardware store and have them replace the washer, the seat (which you will have to install at home,) and have them show where the stem packing is and to check it (replace if needed)
Sixth reinstall the seat.
Seventh reinstall the stem.
Eighth turn the water back on and check around the stem for leaks. If there is a leak then tighten the stem packing nut till the leaking stops.
Ninth replace the knob.
At this point the faucet is completely rebuilt and should be trouble free for years and you'll have the basic tools for repairing any other faucet in your house.

Good Luck

Answer 2

You can try this guide for tips on fixing leaks http://www.allhomerepairsyourself.com/fixing-leaky-faucets.htm

Answer 3

ahahahah..properly Hawkeye as i comprehend your a genuine guy and don't desire a plumber all I might desire to assert is i desire your greater effective a million/2 likes the sound of drip drip drip drip each and every night!!

Answer 4

http://www.everythinghottubz.com/