I just partially disconnected my printer and then hooked it back up. Now it does not print. I checked under properties and it does show the printer is still installed. Anything else that I can do?
2006-07-31 10:20:01 · 6 answers · asked by cc 1 in Computers & Internet ➔ Hardware ➔ Printers
have you tried rebooting?
2006-07-31 10:25:46 · answer #1 · answered by Jim R 5 · 0⤊ 0⤋
You may either have to download the driver for the printer again or check that your printer is connected and working correctly.
2006-07-31 18:48:37 · answer #2 · answered by Chris 4 · 0⤊ 0⤋
oso check your power connection as lose connection is often the main cause for your printer not working, if the pc, and the printer are in working order. use an electrical extension cable to check your electrical connection through another power point.
2006-08-04 06:15:39 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Check your printer manual guide to figure out the problem.
2006-07-31 17:34:20 · answer #4 · answered by Anonymous · 0⤊ 0⤋
make it sure that you are selecting the right printer in print settings, sometimes there is no printer selected, go to setings and select one.
2006-07-31 17:39:58 · answer #5 · answered by Vacciph_m 1 · 0⤊ 0⤋
Turn off, back on the printer
If still not working
Reboot your PC
2006-07-31 17:25:58 · answer #6 · answered by Archer Christifori 6 · 0⤊ 0⤋