It isnt american money so dont worry i also dont have the resources to drill a hole without ruining the coin.
2006-07-31 04:58:15 · 6 answers · asked by a s 1 in Games & Recreation ➔ Hobbies & Crafts
Hi...I am a coin dealer in the Midwest. There are several ways to do it...it depends on how fancy you want it to be. Some people just take a plain silver bracelet or bangle and solder the back of the coin to it (after curving the coin slightly to follow the contour of the bangle). My advice would be to go to a jeweler...they do stuff like this all the time and often have pre-made setups where all they have to do is add the coin.
Hope this helped.
2006-07-31 06:19:19 · answer #1 · answered by answerman63 5 · 0⤊ 0⤋
There are a lot of ways to make a bracelet with the coin. The question is what kind of a bracelet do you want? If you can not drill a hole you could make a bracelet out of air or oven hardening clay and sink the coin into the clay before it dries or is baked in the oven. You could use wire to wrap the coin and then make a bracelet from the same wire you wrapped the coin in. You could ask someone else to drill the holes for you. You can drill very small holes that would not really ruin the coin. You could use a hammer and an anvil if the coin is big enough and your wrist is small enough to beat it into a bracelet. This will ruin the coin but I have a ring I made like this many, many years ago. There are many many ways to use a coin in a bracelet. Look around on the net and in magazines for inspiration and ideas get creative and whatever you do enjoy yourself. Good luck.........
2006-07-31 12:09:19 · answer #2 · answered by budaboy 3 · 1⤊ 0⤋
Drill 2 small hole on either side of the coin, thread chain or rope through holes and you have a bracelet!
2006-07-31 15:14:53 · answer #3 · answered by cannondalerick 3 · 0⤊ 0⤋
hot glue gun a line on the coin then grab the sting that ya wanna use
2006-07-31 12:04:57 · answer #4 · answered by vidkid234 3 · 0⤊ 0⤋
Hmm try to get many like it or different shapes and sizes. Get a string and add beads. Then tie a not. And then get a hot glue gun and glue it on where there is no beads . =]
2006-07-31 16:43:04 · answer #5 · answered by :] be who you are. 2 · 0⤊ 0⤋
Go to the store or something like that and you might see these plastic things that you put over small things like keys and stuff. You could get that and it might work
2006-07-31 13:19:27 · answer #6 · answered by iluvb5dkpcb 2 · 0⤊ 0⤋