Lost the remote. Told I have 2 buy a whole new alarm system. There has to be a way 2 bypass this. Can someone tell me if a fuseable linkage will bypass it? I have it connected to a toggle switch for the dash but how do I hook up the other wires to the original fuse holder. I mean every time I want to start my truck I have to put the key in the ignition and turn to on position, place the 20 amp fuse under the dash in the fuse holder that controls the alarm. Then I have approximately 60 seconds to start the truck or the kill-switch kicks in. And vice-versa to turn off. I am tired of bending under the dash everytime I have to start my vehicle.
2006-07-29 18:43:31 · 2 answers · asked by Joy W 2 in Cars & Transportation ➔ Maintenance & Repairs
add on after truck built it has power coming somewhere cut power no alarm if it was factory bigger problem be in horns major headache so fuzz box find hot wire from alarm to see what color and see how it fuzzed line or box or just plug in box in Accessory slot
2006-07-29 19:24:58 · answer #1 · answered by r_yo53 2 · 12⤊ 5⤋
Look under the dash, and find the control module for this alarm system, and remove it Unhook everything attached to the control module and do away with it. If it is causing that many problems, just remove it, and have it replaced with an alarm system that you have all the components for. It is not practical to keep removing the fuse and reinstalling to get the vehicle to run. A new alarm system will provide a better option to protect yourself and your investment. Your local electronics store, Best Buy, etc. will install it for you. I wish you the best of luck.
2006-07-30 02:37:45 · answer #2 · answered by yugie29 6 · 0⤊ 0⤋