2006-07-29 18:17:39 · 5 answers · asked by jon 3 in Cars & Transportation ➔ Other - Cars & Transportation
sledgehammer
2006-07-30 13:05:26 · answer #1 · answered by daddysboicub 5 · 1⤊ 0⤋
Need 2 guys, take a piece of heavy duty wire, (piano wire), poke it through the goop that glues the windshield to the car, then pull it all around the windshield.
2006-07-29 18:22:01 · answer #2 · answered by Rich M 3 · 0⤊ 0⤋
Take the seals off and lift it out. Or cut it out with a hot knife. It depends on the windshield.
2006-07-29 18:21:40 · answer #3 · answered by nezzy 2 · 0⤊ 0⤋
Forget it. If your car is newer than 1988 then it is equipped with a 'bonded' adhesive. It is extremely labor intensive to remove and you will break it. Please have a professional remove it (cost about $50.00) before you slice your arms to the bone.
2006-07-29 18:53:46 · answer #4 · answered by Anonymous · 0⤊ 0⤋
there is a special knife that has a cable and second handle attached you can get one at harbor freight trust me this is the best way good luck
2006-07-29 18:46:31 · answer #5 · answered by riksolo 3 · 0⤊ 0⤋