English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

The wooden slats on my platform bed broke so I brought another set. The ones I brought kept sliding off so now I just want to get rid of them. Please help me if you know how.

2006-07-29 17:38:58 · 3 answers · asked by smiths100584 1 in Home & Garden Other - Home & Garden

3 answers

What is usually known as a "platform bed" dies not normally need slats. The top upon which the matresses rest is usually plywood. If your bed has slats, you will need to replace them when they are broken.

Good luck with your problem.

2006-08-01 14:05:47 · answer #1 · answered by exbuilder 7 · 10 0

If your bed sits on a frame, the wooden slats help hold it on, and support the bed. If you don't use slats, the bed will most likely break. Take good slats, and drill a hole in the end of each slat, and into the frame support, then slide a nail in each hole, or screw in a screw. One per end of each slat and your slats will stay in place. don't try hammering in nails or the wood will split, drill holes first. Little holes. Use nails that are just long enough to slide thru the slat and into the support, but not so long they stick up.

Or, remove the bed frame, take it down and out of your room,and sit your bed on the floor.

2006-07-31 13:22:43 · answer #2 · answered by mw 4 · 1 0

Spring

2016-03-27 06:36:10 · answer #3 · answered by Anonymous · 0 0

fedest.com, questions and answers