I have the internet working fine (finally!) and everything is set up perfectly. Already tried the rebooting and the troubleshooting sections and going to 192.168.15.1.... i dunno if i have to change sumthing there. But i still have no dial tone and i had one yesterday. the only thing that changed is that i had a bad internet connexion then and now i fixed it.... moving something else on the way. the phone is set to tone and not pulse. what is wrong?
2006-07-28 07:54:35 · 4 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Other - Hardware
Power cycle your Vonage device and your modem. Unplug the power from both for about 30 seconds. Plug the modem in first and let it sync up, then plug in the Vonage and let it sync.
2006-07-28 07:59:25 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Unplug each and each and every of the cable's out of your modem and the router. anticipate 5 minutes and the flexibility up your modem after your modem is up and operating merely plug in plug in the flexibility cable of the router wait until eventually it is powered up connect all the different cables. If it nonetheless would not artwork you need to reconfigure the router with the modem! sturdy success!!!
2016-11-26 21:05:46 · answer #2 · answered by ? 4 · 0⤊ 0⤋
I think you can access that on your phone settings.
2006-07-28 07:58:38 · answer #3 · answered by Julie 5 · 0⤊ 0⤋
call customer support...lol
2006-07-28 07:57:47 · answer #4 · answered by mastermind 3 · 0⤊ 0⤋