2006-07-28 04:45:57 · 5 answers · asked by ashwin_deep3 1 in Computers & Internet ➔ Computer Networking
1. Check if both the PC's are on the same subnet
2. Check if the firewalls are turned off
3. Try pinging the loopback address.
Do the above steps one by one... and if they dont work then, probably try changing the cable.
2006-07-28 05:29:04 · answer #1 · answered by sn 2 · 0⤊ 0⤋
manually configure the NIC's
Check the IP address on both.
check subnet mask
What type of cable also..supposed to be crossover ehterent needed
2006-07-28 04:53:08 · answer #2 · answered by Dennis A 2 · 0⤊ 0⤋
Check the IP address on both.
Make sure the subnet mask is something like 255.255.255.1
You can't use DHCP - you'll have to manually setup the IP addresses.
make sure they are in the same workgroup.
2006-07-28 04:49:48 · answer #3 · answered by Anonymous · 0⤊ 0⤋
the two network cards need to have IP addresses within the same subnet.
How did you manually configure the NIC's?
2006-07-28 04:46:54 · answer #4 · answered by marmozsdx 2 · 0⤊ 0⤋
oh..may not be on same netowrk
What type of cable also.
.supposed to be crossover ehterent needed
or give me ip addresses..
give me subnet mask also
I can tell
Check Ip addresess
2006-07-28 04:47:45 · answer #5 · answered by snow l 3 · 0⤊ 0⤋