how to connect two computers so that you can transfer data to each other,sample codes?

Question

computer may or may not be connected to a network. What if connected to a network and what if not connected to a connected. How can you transfer data from each other using some kind of cable?

Answer 1

Ways are:
(1) LAN Cable - if no hub, your cable MUST be cross over.
(2) LAPLINK Cable - cheapest cable.
(3) USB to USB - MUST have USB Direct Cable.
(4) WIFI~WIFI - both must have WIFI USB, ad-hoc connection.
(5) Other ways...

Here are links for your guidance!

Answer 2

i assume once you're saying "move records" you merely recommend records. No community: both pcs will choose a NIC (ethernet port) and also you'll also choose a crossover cable. A crossover cable is an identical element as an everyday ethernet cable except 2 wires are flipped. when you've that plugged in, you choose to statically assign IP addresses to both pcs. To assign a static IP address, bypass into community Connections (assuming it is a homestead windows setup) and correctly click on close by area Connection. Hit "residences". in the record, discover TCP/IP and hit residences. you could assign IP addresses the following. i ought to assign one comptuer 192.168.0.a million and the different 192.168.0.2. community: you need to be able to bypass. you could also choose to turn on report and Print Sharing. in the residences verbal substitute for close by area Connection, you need to verify a verify next to customer for Microsoft Networks and a verify next to report and Print Sharing for Microsoft Networks. in the different case, you could properly click on any folder (in XP) and hit "Sharing and safe practices..." then hit "percentage this folder". -Dan