2006-07-27 08:10:12 · 4 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Printers
rubbing alchol ,,, q-tips.
soak a wash cloth in Rub-Alch,
remove ink cartridges (carefull not to touch the green board on the side)
rub the bottom of the cart- where the noozels are in the wash cloth
your going to need to OPEN the Hatch (on top of printer) so you can see the cart- print path,(how the cart- goes back and forth
Next step is tricky and I am not sure How to say it...
watch the path, on the far right of the path (you might need a flash light to see it)
(you will also need to push cartridges out of the way)
there is a small black flap about an inch long , ink tends to builup on it, soak a q-tip in alchol and run it back and forth the length of the rubber black thing, it will take you several q-tips
2006-07-27 08:25:55 · answer #1 · answered by tiqhud 4 · 0⤊ 0⤋
you frist remove catridge from printer.
you have to option
1.you can clean the nozel with alcohal
or
2. put catridge in to boil water for 5-6 minute
after that clean nozel with cotton
2006-07-28 00:31:24 · answer #2 · answered by prashant t 1 · 0⤊ 0⤋
Make a printer self test, and try to push it a bit
2006-07-27 08:20:04 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Check the Epson web site for your model. They will have instructions there. (As you did not list model number can not be more specific. Each is different.)
2006-07-27 08:13:46 · answer #4 · answered by dewcoons 7 · 0⤊ 0⤋