how can i restore my forgotten password on my belkin wireless g router?

Answer 1

find the reset button and hold it down for 15 seconds or so and it should revert to the factory userid and password.

Answer 2

1. If u have forgotten the login password for the belkin router set up page u need to do an AP RESET on the router.
a). look for a small reset pinhole on the back of the router
b) use a pin and hold it inside the pin hole applying pressure for 1-2 min approximately.(if the reset is taking place lights on the router will start flashing)
c) than go ahead and unplug the power cable to ur modem and router and wait for 2 min..
d) plug in back the power cable to both the devices
e)reset done
f)check for light status on the router..
g)if all lights r steady..open web browser
h)on the main blank address bar type 192.168.2.1 and enter
i) u will get the belkin router set up page..now if u have a login password being asked leave it blank and hit submit
j) now u can go ahead and set ur new password on the security log option

Answer 3

properly the on the spot G known is rather phasing out in terms of as we communicate's on the spot standards. the main person-friendly form of router is one that announces on the spot N. i could be extra vulnerable to purchase a on the spot N router than to apply a on the spot G router. Your information superhighway velocity could even have an impact with that previous on the spot G router because of the bottle necking it may reason. you ought to purchase rather low fee on the spot b/g/n routers which announces all on the spot standards. you will see extra effective speeds and an prolonged variety in case you circulate this path as properly as backwards compatibility with all your older on the spot G instruments you will connect with. ---------------------replace------------... no longer inevitably, in specific situations after a on a similar time as a router can lose its sign capability, and alter into much less effective. Assuming you're making use of the on the spot G router good now, the on the spot radio interior has exchange into previous and convey a weaker sign for this reason lowering your information superhighway velocity while surfing on those instruments. If a possibility try plugging an ethernet twine into the router and the different end right into a working laptop or workstation/laptop. Run a speedtest and verify in case you have become the finished 50mbps you paid for. in case you do then the router is maximum in all probability the perpetrator, and is slowing down your community. via upgrading this router you may take finished earnings of that 50mbps you paid for and have swifter on the spot velocity making use of the N band.

Answer 4

Contact Belkin if you can't get into the router configuration.

Answer 5

on the back of the router there is a reset button, press it but it will delete all settings stored on the router.

Answer 6

You need to directly connect to the router. Then you have to open it up 192.168.1.1 (or whatever your default gate way is). If you don't know the default gateway go to run-> cmd.exe -> ipconfig .