The layout of the keyboard was changed because of typewriter jams. With the keys in alphabetical order, some of the most used keys were too close together. If you've ever used an old fashioned typewriter before, you know if you push down two keys that are next to each other, they like to stick. This happened so much, that they re-designed the keyboard with this qwetry configuration.
2006-07-25 03:10:10
·
answer #1
·
answered by sleekfeline 4
·
1⤊
0⤋
Good question.
A long time ago in the days of the manual typewriter, researchers conducted a statistical workout and found out which of the alphabets are the ones most frequently used.
So, the ones that figured at the top of the list got to find a place where they can be accessed by the forefinger and near the centre of the keyboard. The not so frequenters got pushed to the outer edges.
Take a good look at the keyboard and it will be obvious.
2006-07-25 03:11:08
·
answer #2
·
answered by pixpaxx 2
·
0⤊
0⤋
When typewriters were invented, they found that slower typing worked better because it took time for the mechanical typewriters to react to the key punch and they would jam. The keys were arranged in the way they were in order to slow down the typing process.
Since that time, obviously jamming keys is not a problem but everyone is used to the "qwerty" key arrangement. (named after the first six letters in the upper left-hand side. Now, there are other arrangements that can be used and you can change the key sequence through Windows. The most common one is known as "dvorak" and supposedly results in much faster typing for someone who is trained to use it.
The way to switch is to open up the control panel on Windows and select keyboard properties. Go to the Input Locales tab and select "Switch to English (United States) - US" then click on "Change Key Sequence". From there, you can change the key sequence on your keyboard to a different style.
I suspect you can find more information by searching for "dvorak" as well but that is about as much as I know.
2006-07-25 03:12:32
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
a generic QWERTY keyboard is designed in accordance to which letters are maximum ordinarily utilized in language. The letters on the excellent line contained in the middle have a tendency for use the most then it truly works down and to the perimeters. ERTYUI being the finest keys to get to with the index and center hands and so on. many years in the past someone redesigned the format of the keyboard splitting the letters in 0.5 and putting each and every block of letters aside. The format of the letters replaced into replaced particularly after somewhat analyze and it replaced into got here across that no longer purely replaced into this new way swifter to apply , it also eliminated repetitive rigidity experienced by those who form plenty. regrettably, the hot way replaced into seen as too radical from the QWERTY setup and replaced into under no circumstances presented into significant use.
2016-10-15 04:42:19
·
answer #4
·
answered by Erika 4
·
0⤊
0⤋
I believe whoever arranged them did so with the idea that the keys for letters more frequently used would not keep slamming into each other. Look at a very old typrwriter, the kind where keys flew out from the keyboard onto the page.
2006-07-25 03:06:14
·
answer #5
·
answered by American citizen and taxpayer 7
·
0⤊
0⤋
the letters on the keyboard are arranged in a very intelligent order
they are not arranged in the alphabetical order
the letters are arranged as per the priority of the use of the letters
for example the letters like 'q' , 'z', 'x' and others are not used as frequently as that of 't','h', 'a','s' and others so they find the outter side and edges position while other for frequent letters find the centre and other good positions
moreover the keyboard is designed in such a way that you use four fingers so that it increases your efficiency
2006-07-25 03:10:06
·
answer #6
·
answered by akshay 2
·
0⤊
0⤋
When typewriters were initially designed, the designers devised the QWERTY system to maximize speed, etc. This allows for the most common letter patterns to be easily used.
2006-07-25 03:05:29
·
answer #7
·
answered by Mister Bob the Tomato 5
·
0⤊
0⤋
When typewriters were first being used, there were two systems to go by QWERTY and DVORAK. QWERTY is a whole lot more simpler to learn. If the typewriter had been A thru Z, it would not have been efficient to do so.
2006-07-25 03:08:33
·
answer #8
·
answered by C93 4
·
0⤊
0⤋
they used to be in order but people got so fast at typing that it would jam the typewriters so they scrambled them
2006-07-25 03:06:29
·
answer #9
·
answered by Phish 2
·
0⤊
0⤋