I connect my memory card of the Digital Camera in the Card reader but it is not accepted and no light is on.?

Question

I had used the same memoru card before and it had loaded all the photos to my computer. Now it does not.

Answer 1

make sure you have something on the card
if i put my card in without anything on it
it do`s not register or show either
if i put one item a picre or anything then it shows so try this first
put something on it
then put it back in

last option is make sure that if you format it
you did it int the camera or whatever you use it for

my first cards i used format through the computer
after i did this i could not use the cards as the computer did this in fat32
for a computer format
took them to my cousin
who is well into computers
he checked my memory cards (SDcards i have)
then done another format in fat only they worked again

so hope one of these options work for you

Answer 2

attempt those steps: a million. Unplug the cardboard reader 2. Unplug the reminiscence Card from the cardboard Reader 3. Restart your notebook 4. Plug the reminiscence Card into your card reader 5. Plug the cardboard reader back into your notebook 6. stumble on the photographs on your tensecontinual (as quickly as you stumble on the image folder open it) 7. spotlight/decide on the photographs you desire to exhibit on your digital image physique after which DRAG them over into the reminiscence Card reader region. (by capacity of double clicking on your Gcontinual or reminiscence card reader it would improve a window. you will possibly desire to have the capacity to tug the photographs into that window) 8. Take the reminiscence card and plug it into the digital image physique desire that helps :) suitable Regards, Dusty

Answer 3

Make certain that connection is tight. Unplug and replug it in firmly. The plug, not the card. (it works for me)

Answer 4

daft answer have you put the card in the wrong side up

Answer 5

It could be damaged.