English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

4 answers

probably have to use the dipstick hole.

2006-07-23 12:53:46 · answer #1 · answered by AnswerGuy 4 · 0 1

There should be a plug on the side of the case about 1/3 of the way up from the bottom. They can usually be removed with a 3/8 drive ratchet. On the older 4 speed s10 it was located on the drivers side, just park the truck level & fill it until it starts to dribble out of the fill hole.

2006-07-23 13:00:40 · answer #2 · answered by Anonymous · 0 0

driver side just above linkage pipe threaded fill nut .fill till runs out hole then replace nut

2006-07-23 12:53:53 · answer #3 · answered by bkrboyz 4 · 0 0

it probably just a plug screwed into the side of the trans.

2006-07-23 12:53:36 · answer #4 · answered by Bob 3 · 0 0

fedest.com, questions and answers