Is there a free place to get information on how to dianose and repair a Bronco ii 5 sp.manule transmission?

Question

My shifter became hard to shift into gears. It then started to feel when pulling out of a gear that it wasn't being released easy even with the clutch pushed in.
Now even with the clutch pushed all the way in if try to start the engine it pushes the car in gear . The clutch isn't that old. I don't know if there is even a way to adjust the clutch. Any help would be much apprectated. thanks.

Answer 1

I've never met a clutch I couldn't adjust! Another thing to take into consideration is whether the pilot shaft bushing/bearing was replaced with the clutch. It is in the end of the crankshaft and holds the input shaft of the transmission steady. If that vehicle has a hydrolic clutch, it may need bleeding or even replacing one of the cylinders (master/slave) if it isn't just low on fluid.