To tune your trumpet, you would need another instrument or a tuner around to help you. First you need to understand where the main tuning slide is: it is located at the first U-Bend comeing straight off the pipe with your mouthpiece connected to it, traditionally, the first spit valve is located on this slide. If you grab a hold of this "slide"and pull it and push it, you will realize that this slide has the ability to change the length of your pipe. If you cannot pull or push it, then that means that your tuning slide is stuck. To me it sounds like you are a young player, so I will recommend that you have a more experienced trumpet player look at your horn to fix it OR best of all hve it fixed by a professional trumpet repair shop.
Once you know that you can move your slide in an out and you have a tuner or another instrument. You need to determine what key your instrument is in. I will assume that it is in Bb as most trumpets are. If it isnt just email me with what key and I can help you later. Have the other instrument play or tuner record a concert Bb. On a piano this is the note Bb. It will vary from instrument to instrument, but the note played will be the same note as the middle C (open valve) on your trumpet.
Tuning this note will require some experimenting. If you notice that you can hear beats in between both of your notes, then you know that the frequency of both your notes are not the same. The term flat notes means a note that has a lower frequency than the note you want and sharp means that you are at a higher frequency than your target note. So you can imagine that flatten means to lower your frequency and sharpen means to increase your frequency.
The best way to alter frequency is to change the length of your trumpet and that is why the main tuning slide is created on the trumpet. Now remember this: to SHARPEN a note, you must PUSH your slide in; to FLATTEN a note, you must PULL your slide out. If you have a tunner, you can just easily see if you are flat or not. Normally there would be easy indications ont he tuner itself. If you are sharp then pull out your slide to bring the pitch down and if you are flat then push your slide in to bring the pitch up. However, if you are doing this by instruments then you need to experiment by either pushing in or pulling out. If it sounds like you are pulling further apart (the beats increase) that means that whatever you did, (either push or pull) then you want to do the complete opposite. It is possible to over adjust it and go past the pitch you want. No worries. Just sharpen the note if you went flat or flatten the note if you went sharp. The goal is to make the note sound almost as same as possible.
Tuning is the hardest thing to pick up for beginners, so be patient and you will get better and better.
2006-07-24 12:06:38
·
answer #1
·
answered by indiantrumpet 4
·
1⤊
0⤋
Tuning A Trumpet
2017-01-04 15:41:12
·
answer #2
·
answered by ? 4
·
1⤊
0⤋
Well, you'll need some slide grease with which to lubricate the tuning slide. Make sure that it can slide freely in and out before you try to tune it.
Then just get a tuning note (from a piano, tuner, etc.) and play the same note on your trumpet. Push the tuning slide in slightly to "flatten" the note, pull it out to "sharpen" it.
Be aware that most trumpets are in the key of Bb, so a trumpet's G is a piano's F ("concert F").
As a rule of thumb, the slide ends up about a finger's width out from the lead pipe.
2006-07-22 14:35:10
·
answer #3
·
answered by nobody 3
·
0⤊
0⤋
This Site Might Help You.
RE:
How do you tune a Trumpet?
I have a trumpet made by Simba,and i would like to know,very specifically,how to use the tuning slide,please.
2015-08-07 16:30:17
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
For the best answers, search on this site https://shorturl.im/awhni
There are many different kinds of trumpets. If you want a standard beginner one, get a Bb. Some bands use C trumpets, which have a shorter lead-pipe to increase the pitch to the key of C.
2016-04-07 02:56:37
·
answer #5
·
answered by Anonymous
·
1⤊
0⤋
With a trumpet tuner.
2006-07-22 14:34:04
·
answer #6
·
answered by Jenny A 6
·
0⤊
0⤋
I love indie folk rock!! From what I know, which is little, they're just mild variations on the pitch. Bb is the most common I think...
2016-03-22 17:41:47
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
i've been surfing the internet more than three hours today seeking the answer to the same question, yet I haven't found a more interesting debate like this. it is pretty worth enough for me.
2016-08-23 02:28:30
·
answer #8
·
answered by cara 4
·
0⤊
0⤋
i donno but the only advice i can give you is to ask jeeves, and if jeeves dosn't know find some one close by that plays trumpet and ask them for help, or ask an employee at your local music shop.
2006-07-22 14:33:43
·
answer #9
·
answered by Pat 4
·
0⤊
0⤋
Need more details before I can give answer
2016-08-08 06:55:15
·
answer #10
·
answered by Anonymous
·
1⤊
0⤋