Ive taken the tire off and the caliper(brakes). taken the axle nut off as well. removed all 4 bolts holding lug cap to rotor but it still wont come off do i have to remove the whole assembly? Is it a diy job can anyone help?
2006-07-22 11:24:50 · 5 answers · asked by ricksrick 2 in Cars & Transportation ➔ Maintenance & Repairs
Ive already tried a pulley the only thing it did was push in the axle then stopped pushing after about 1-2 inches. Still stuck any help?
2006-07-22 11:41:12 · update #1
i only have about 1/4 of an inch between this cap thing and the rotor. i cannot pull the nut out ive tried hammering it and nothing happens ive broken apart this rotor and cap however the cap holding the nuts is stuck i cant even get to my rotor. its behind!! I had 3 guys trying to help me fix this stupid thing we were all baffled!
2006-07-22 11:53:33 · update #2
I have no power tools im broken down in a parking lot!!!
2006-07-22 12:47:51 · update #3
you may not need to remove the wheel assembly if you have enough room to put a new lug from behind. BASH the old one and it should come right out, a new one will fit in the hole just tighten it with a lug wrench, you will need someone to assist you to hold the brake pedel down so it doesnt spin when you tighten it. I changed many lugs over the years but never on a hyundia but it is very simple. If you dont have access to the lug you may need to remove the rotor and caliper, but dont fear it was built by someone with less knowledge than you, so you shouldnt have any trouble. the lugs are about $2 each a hint put a drop of oil on each one before you install it will stop rust and make it easier to remove later.
2006-07-22 11:46:11 · answer #1 · answered by johnman142 6 · 1⤊ 1⤋
An air hammer is what I would suggest. I would put the hub back together and it will give you a more stable surface to hammer against. Good luck.
2006-07-22 12:06:39 · answer #2 · answered by jeff s 5 · 0⤊ 0⤋
What God could have for us is maximum magnificent. the top sport? What end sport? There are basically consequences whichever way. in simple terms God can do God's will the mostest. i in my view, shall objective to do as God could have me do... God speaks to us all in many procedures, including voices, targets, visions etc. unfastened will operates out of determination, unfastened will is thereabouts the devil's will, to me in my view. this is an apple genesis tale back. do not settle for apples from the devil. do not settle for apples from the devils. Ask God approximately apple of life, & apple of information. do not take from the centre tree. God so is conscious. Ask God first. lots of my braincells look to think of they have a will, while if truth be told, all they have is volition. God is conscious. Will is largely undesirable, i in my view would not bypass alongside that path. Grace is maximum greater suited. Grace comes at Grace velocity. thank you be to God.
2017-01-03 09:24:22 · answer #3 · answered by ? 3 · 0⤊ 0⤋
dont know about hyundai but most FWD you need a puller as the hub is tight fit in bearing. should be able to drift out the broken stud and fit a new one.
2006-07-22 11:31:52 · answer #4 · answered by 1crazypj 5 · 0⤊ 0⤋
You need to buy an American car. And you need to making homophobic threats to kids who are needing help and not your abuse. 80% of homophobes are gay themselves. Now seeing the car you drive, i believe it.
Thanks for the email. I don't hook up with homos off the web, but you might try www.dictionary.com before you send your next email.
2006-07-23 15:19:13 · answer #5 · answered by kiz_ma_az 4 · 0⤊ 0⤋