Powerboats always have a field of view that's from the center or higher up to get a 360 degree view. This is required by law, before the boat can even be manufactured. Sailboats are steered from either the center or the rear, depending on the design of the boat, because normally, when under sail, the boat is heeling (listing) to leeward, the side away from the wind, so that the captain has an unobstructed view. When under power, sailboats usually are going very slow, because the engine is designed with just enough power just to get them in and out of the harbor or slip. Usually only about 5-6 MPH, so that the coxwain or captain has time to move around the cockpit to see what's going on around him/her.
2006-07-23 07:14:19
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
Putting the helm close to the rudder simplifies the mechanical connection and lessens the cost. In large yachts, space is available to use hydraulic connections which enables the helm to be put anywhere.
2006-07-23 00:16:58
·
answer #2
·
answered by Richard B 4
·
0⤊
0⤋
Because of physic's; it is impossible for a steering rudder to be at the front. Plus the rudder would get torn up too easily. Run experiments and see for yourself.
2006-07-22 15:10:14
·
answer #3
·
answered by Crossroads Keeper 5
·
0⤊
0⤋
Boats are steered traditionally from the stern because it is the closest easiest connection to the rudder . Aquadynamically the rudder is most effective in the stern.The boat is easier to control with the rudder in the stern.
2006-07-24 16:23:03
·
answer #4
·
answered by science teacher 7
·
0⤊
0⤋
Sailboats are steered from the back mostly because that is a convenient place from which the sheets can be adjusted.
2006-07-22 15:06:53
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
my guess is b/c most large yachts have navigation systems, radar, gps, and all of that fun stuff. its not like driving on a road.
2006-07-22 15:07:27
·
answer #6
·
answered by TLynn 2
·
0⤊
0⤋