2006-07-22 07:04:27 · 4 answers · asked by smokinghandsomedude 1 in Home & Garden ➔ Do It Yourself (DIY)
well the way I take mine apart is 1st I drain the mattress, then remove it and ur liner along with ur heater. If ur just moving it to another spot then u can just move ur frame in sections but if ur taking it apart for awhile then as u undo each part make sure u mark them so will know where what part goes where if u decide to put it up again. I hope I helped u out some
2006-07-22 07:13:52 · answer #1 · answered by all_hallows_eve_04 1 · 0⤊ 0⤋
drain water remove mattress. Remove bolts holding waterbed frame together
2006-07-22 07:07:56 · answer #2 · answered by aussie 6 · 0⤊ 0⤋
This is for those who have never put water in or out of a water-bed. Fill a water hose with water from an outdoor spigot, if possible. Once the hose is full and water is filling the water-bed, unscrew the hose from the outside spigot and let it drain. It will drain the water from the bed.
2006-07-22 07:25:59 · answer #3 · answered by Iquest57 1 · 0⤊ 0⤋
EMPTY the water first!
Remove the matress bag, liners and heater.
Unscrew the bolts on each corner that hold the side walls and head board together.
Start moving 'em.
2006-07-22 07:09:43 · answer #4 · answered by Anonymous · 0⤊ 0⤋