i have all th eqipment and stuff i just dont know what to do and i lost the directions
2006-07-21 15:23:39 · 6 answers · asked by Anonymous in Computers & Internet ➔ Other - Computers
All you have to do is find the cable that connects the camera to the computer. Plug it in, if you have disk/ software, open the software that let's you see the pictures, than copy and paste into your Picture folder , if you have one. If you have an online album you can load up the pictures into the album once you saved them on your computer.
You may also search online the brand name of the camera you own. Sometimes the site may tell you the brand/model and instructions or can replace the lost instructions.
2006-07-21 15:44:03 · answer #1 · answered by sxyredht21 3 · 0⤊ 0⤋
Depends on what your camera is equiped with. Is it a new one with flash memory cards? Or an older one. if it is a newer model with flash card, you need a flash card reader that plugs into the computer. You remove the flash card from the camera, insert in the reader, and copy onto your hard drive. if it is an old camera without flash card memory you should have a cable with it to connect to a computer port. With this method you will probably need software from the camera mfg. Hope this helps
2006-07-21 22:27:13 · answer #2 · answered by InnerCircle 4 · 0⤊ 0⤋
The camera most likely came with a program which must be installed. Once you do that, and hook up the camera to the computer, the program will find and allow you to download the pictures from the camera's memory to the computer's hard drive.
2006-07-21 22:26:37 · answer #3 · answered by Marvinator 7 · 0⤊ 0⤋
you should have the installation CD that comes along with the camera. put that in and install. After you install the software CD there should be a plug with a flat head on one side. The other side connects to your camera, and the flat part connects to your computer. After you put that in, most likely you will be able to download your pictures from the camera to the computer. Good Luck.
2006-07-21 22:28:32 · answer #4 · answered by Lady Sardonyx 5 · 0⤊ 0⤋
It will be difficult to answer this question without knowing the brand and type. Your best bet is to do a search online going to the website sponsored by the maker of the camera. Usually you can download or order a new owner's manual.
2006-07-21 22:28:33 · answer #5 · answered by misscatitude2002 3 · 0⤊ 0⤋
Put the card from the camera in your computer usb card slot. Then right click the start menu and select explore. Then find your card on the list and click on it.
2006-07-21 22:29:12 · answer #6 · answered by .......... 4 · 0⤊ 0⤋