Four quarts for the engine and oilpan PLUS you want to change the oil filter at the same time, making a 5th quart.
2006-07-20 18:31:58
·
answer #1
·
answered by urbancoyote 7
·
0⤊
0⤋
O.K. Automotive 101. Firest of all a Long Block is one step from becoming a complete engine. Most all Chevy v-8's require 5 QTS. of oil, this usually includes the filter. There are a few like the new 5.3 litre that can require 6Qts.
2006-07-20 18:26:40
·
answer #2
·
answered by David S 3
·
0⤊
0⤋
As a standard installation, with a full-sized filter, five is customary. With the smaller filter, four + whatever the filter requires is customary. With a HD oilpan, seven is the rule. On a fleet vehicle, five-plus, sometimes to six or six and one half. For racing applications making use of a luberefiner, the capacity is usually seven +whatever the capacity of the add-on is. The point is: No less than four plus whatever the filter requires, then topped-off to the full mark on the dipstick after a run-in. Hope it helps.
2006-07-20 20:37:37
·
answer #3
·
answered by jbarry315 2
·
0⤊
0⤋
5 quarts
2006-07-20 18:22:55
·
answer #4
·
answered by matt 1
·
0⤊
0⤋
5 qts is the counseled volume. however, once you regulate oil with a sparkling filter out, you should position in the counseled volume and then start up and run the engine for a jiffy to proper off the hot filter out. Then, verify oil element on dipstick and proper off as needed.
2016-11-24 23:44:40
·
answer #5
·
answered by ? 4
·
0⤊
0⤋
I think Matt is right, but I'd put 4 in, start it up until the oil light turns off and then check the dipstick.
2006-07-20 18:27:00
·
answer #6
·
answered by mechascott_42 2
·
0⤊
0⤋
depends on how deep your oil pan is. Park on level groud and keep pouring and use the dipstick. Don't overfill.
2006-07-20 18:30:31
·
answer #7
·
answered by a 4
·
0⤊
0⤋
five qts pennsoil
2006-07-20 18:30:55
·
answer #8
·
answered by ate up 3
·
0⤊
0⤋