how does subnet masking work?

Answer 1

http://answers.yahoo.com/question/index;_ylt=ApgAs8J0tl.uCRMdH6Ag6Jfsy6IX?qid=20060715034545AAl33Ps

Answer 2

Short answer:from left to right.

Long answer:Subnet mask masks your network address from your address. Typically if you have a class c (256 addresses) network, your mask is 255.255.255.0 the 0 are your addresses.
The mask works as bits so actually the previous mask was in binary
11111111 11111111 11111111 00000000
as you can see, if we change it to 255.255.254.0 we get a bin mask
11111111 1111111 11111110 00000000 so we have a 512 address network and so on.
Nowadays we are using classless masking, meaning that even smaller address blocks than 256 could be assigned. Like I have seen 255.255.255.252 (11111111 1111111 1111111 11111100) resulting 4 addresses.
Actually those address blocks must have 2 addresses that can't be used by normal computers, like 1 for (adsl) router and 1 for network address, the 1st possible address is the network address and typically the next is the router address,
And you quite likely have figured it out now that there cannot be zero bits inside the 1-bit area, like 10111111 11111111....

Answer 3

1. IP Addressing
At this point you should know that IP, the Internet Protocol, is a network layer (OSI layer 3) protocol, used to route packets between hosts on different networks. To suit this purpose, IP must define an addressing scheme, so that a packet's intended destination can be indicated.

An IP address is composed of 32 bits. These 32 bits are divided into 4 octets of 8 bits each. You may have seen an IP address represented like this: 172.68.15.24. We must remember, however, that the computer understands this number only in binary, so we must often deal with them in binary. Many people are intimidated by this initially, but soon find that it is not difficult. If you do not allow yourself to be flustered, you can master this topic.

IP addresses are assigned to orginazations in blocks. Each block belongs to one of three classes: class A, class B, or class C. You can tell what class an IP address is by the value in its first octet.

Class A 1-126
Class B 128-191
Class C 192 -->

An IP address consists of two fields. The first field identifies the network, and the second field identifies the node on the network. Which bits of the address are in the network field and which bits are in the host field is determined by the subnet mask.

When a class A IP license is granted, you are assigned something like this: 99.0.0.0. Only the value of the bits in the first octet are assigned. This means you are free to assign any values you wish in the second, third and fourth octets.

The defualt subnet mask for a class A network is 255.0.0.0. High bits, ones, indicate the bits that are part of the network field of the IP address. The default subnet mask does not create subnets. Therefor, a class A network with the default subnet mask is one network. The three octets that are unassigned and unmasked are part of the host field of the address. There is a total of 24 bits in those three octets. Each bit can be in one of two states. Therefor, 2^24 is the number of host addresses that can be assigned on that network, almost. Two addresses are reserved on every network, x.x.x.0 and x.x.x.255. So the total number of hosts possible on this network is 2^24. 2^24-2=16,777,214 hosts for a class A IP network.

When a class B license is granted, the first two octets are assigned. For example, 172.198.x.x. The default subnet mask for a class B is 255.255.0.0. One network, two octets free, 16 bits for the host address field. 2^16-2=65,534 possible host addresses on a class B IP network.

When a class C license is granted, the first three octets are assigned, for example: 193.52.16.0. The default subnet mask for a class C is 255.255.255.0. Once octet makes up the host address field. 2^8-2=254 host addresses possible on a class C network.


2. Reason for Subnetting
We said that the default subnet mask for a class A IP network is 255.0.0.0. Once octet only of a class A network address identifies the network, with this subnet mask. This leaves three octets of 8 bits each, or 24 bits, to identify the host on that one network. 2^24=16,777,216 addresses. Two addresses are reserved, x.x.x.0 and x.x.x.255. 16,777,214 nodes can be assigned an IP address on this network.

It is highly unlikely that any organization would want one network of 16,777,214 nodes. They might want that many devices connected in a wide area network (WAN), thus capablee of communicating when neccessary, but they will want to subdivide this huge network into mostly self-contained subnetworks of nodes that communicate with each other often. This is called subnetting.

To understand why, consider what would happen in either a broadcast or a token passing network that consisted of over 16,000,000 nodes. Nothing would happen. It simply would not work. Though the problem is not as drastic, class B and class C IP networks are often subnetted, also.

The subnet mask is used to subdivide an IP network into subnets. This is a division that takes place in OSI layer 3, so it is a logical division that is created by the addressing scheme. This logical division is usually combined with a physical division. Many subnets are physically isolated from the rest of the network by a device such as a router or a switch. This aspect of subnetting is discussed in Unit 3--Data Link Layer.

3. How Subnetting Works
The bits of an address that are masked by the subnet mask are the bits that make up the network field of the address. To subnet, the default subnet mask for a network is extended to cover bits of the address that would otherwise be part of the host field. Once these bits are masked, they become part of the network field, and are used to identify subnets of the larger network.

Here is where we begin dealing with both addresses and subnetmasks in binary. Get yourself a cold beverage, stretch, take a deep breath and don't worry. Once you get your brain around the concepts, it is not difficult. You just have to keep trying until the light goes on.

3.1 Translating Binary to Decimal
Both IP addresses and subnet masks are composed of 32 bits divided into 4 octets of 8 bits each. Here is how a single octet translates from binary to decimal. Consider an octet of all ones: 11111111.

128 64 32 16 8 4 2 1
--- -- -- -- - - - -
1 1 1 1 1 1 1 1
128 + 64 + 32 + 16 + 8 + 4 + 2 + 1 = 255

Here's another: 10111001

128 64 32 16 8 4 2 1
--- -- -- -- - - - -
1 0 1 1 1 0 0 1
128 + 0 + 32 +16 + 8 + 0 + 0 + 1 = 185

and 00000000

128 64 32 16 8 4 2 1
--- -- -- -- - - - -
0 0 0 0 0 0 0 0
0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 = 0

3.2 Converting Decimal to Binary
Converting decimal to binary is similar. Consider 175:

128 64 32 16 8 4 2 1
--- -- -- -- - - - -
1 0 1 0 1 1 1 1
128 + 0 + 32 + 0 + 8 + 4 + 2 + 1 = 175

175=10101111

3.3 Simple Subnetting
The simpliest way to subnet is to take the octet in the subnet mask that covers the first unassigned octet in the IP address block, and make all its bits high. Remember, a high bit, a 1, in the subnet mask indicates that that corresponding bit in the IP address is part of the network field. So, if you have a class B network 172.160.0.0, with the subnet mask 255.255.0.0, you have one network with 65, 534 possible addresses. If you take that subnet mask and make all the bits in the third octet high

128 64 32 16 8 4 2 1
--- -- -- -- - - - -
1 1 1 1 1 1 1 1
128 + 64 + 32 + 16 + 8 + 4 + 2 + 1 = 255

you get the subnet mask 255.255.255.0.

172.60. 0. 0
255.255.255.0

Now the third octet of all the addresses on this network are part of the network field instead of the host field. That is one octet, or eight bits, that can be manipulated to create subnets. 2^8=256 possible subnets now on this class B network.

One octet is left for the host field. 2^8-2=254 possible host addressed on each subnet.

3.4 Advanced Subnetting
That is the simplist way to subnet, but it may not be the most desirable. You might not want 254 subnets on your class B network. Instead, you might use a subnet mask like 255.255.224.0. How many subnets would this give you? The first step is to see how many bits are allocated to the network by this mask.

128 64 32 16 8 4 2 1
--- -- -- -- - - - -
1 1 1 0 0 0 0 0
128 + 64 + 32 + 0 + 0 + 0 + 0 + 0 = 224

3 bits are allocated. 2^3=8 subnets.

How many hosts on each subnet? Well, 5 bits from this octet are left for the host field, and 8 bits in the fourth octet, for a total of 13 bits in the host field. 2^13-2=8190 possible hosts on each subnet.

The subnet mask is always extended by masking off the next bit in the address, from left to right. Thus, the last octet in the subnet mask will always be one of these: 128, 192, 224, 240, 248, 252, 254 or 255.

Given the IP address of a host and the subnet address for the network, you need to be able to calculate which subnet that host is on. To do this we compare the binary representation of the pertinent octet of the subnet mask witht he binary representation of the corresponding octet in the IP address. Example:

IP address=172.60.50.2
subnet mask=255.255.224.0

50= 00110010
224=11100000

We perform a logical on these two numbers. We will be left with only the bits where there is a one in both octets.

00110010
11100000
--------
00100000=32

This host is on subnet 172.60.32.0.

We also need to be able to find the range of assignable IP addresses on this subnet. To do this, we take the binary that tells us the subnet address, in this case 00100000, and compare it with the subnet mask.

00100000
11100000

The bits convered by the mask we will leave as they are. The rest of the bits we make high. So

00100000
11100000
--------
0011111=63

The range of assignable IP addresses on the subnet 172.60.32.0 is 172.60.32.1-172.60.63.254.

On every network and subnet, two addresses are reserved. At the low end of the range of addresses for the network or subnet, in this case 172.60.64.0, is the address for the network or subnet itself. The address at the high end of the range of addresses, in this case 172.60.95.255, is the broadcast address. Any message sent to the broadcast address will be received by every host on the network.

4. Sample Problem
Here is a sample problem for you to calculate. When you are done, you can check your answers using an online subnet calcualtor at Tactix Engineering.

IP address: 154.16.52.16
subnet mask: 255.255.240.0

Find:
Number of subnets possible on this network:
Number of hosts possible on each subnet:
Which subnet this address is on:
Range of addresses on that subnet:

www.ralphb.net/IPSubnet
www.techtutorials.info/nettcpip.html
www.learntosubnet.com

Answer 4

Here you go...

http://www.firewall.cx/ip-subnetting-intro.php

Answer 5

It has to do with managing http protocol...
http://www.ipprimer.com/addressing.cfm
http://www.thenetworkadministrator.com/hack/SubnetAddressing.htm

Clears it all up, eh?