English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

10 answers

Are you trying to get this informaiton so that you can connect to your internet service or are you already connected and just want it for some other reason?

If you're trying to make your connection, you probably just need to set you TCP/IP setting to "Obtain an IP address automatically" in Windows or set your router to use DHCP to get your network setting automatically.

If you just need the information for your records, the other responses to your questions here will fix you right up.

2006-07-19 08:19:36 · answer #1 · answered by Anonymous · 0 0

1

2017-01-20 05:29:04 · answer #2 · answered by wanda 3 · 0 0

This Site Might Help You.

RE:
how do I find my subnet mask, gateway. dns1 and dns2 without calling my Internet provider?

2015-08-07 05:14:42 · answer #3 · answered by Anonymous · 0 0

run... cmd... ipconfig/all will work if you don't have a router... but if you do have one, you may need to get into your router and look at its settings to get your subnet mask and gateway. If you only need your internal subnet mask and gateway then ipconfig/all will work.

2006-07-19 09:05:09 · answer #4 · answered by therightangle 2 · 1 0

The above answers are ok for the Window$ lusers out there. In Linux just open a shell and type:
/sbin/ifconfig

to see the ethernet card parameters. To see dns info type this:
more /etc/resolv.conf.

2006-07-19 08:23:44 · answer #5 · answered by 45Fan 2 · 0 0

If you are directly connected, in the command prompt window type ipconfig /all - If you are using a router you will need to look up the WAN status page on the router.

2006-07-19 07:47:16 · answer #6 · answered by Interested Dude 7 · 0 0

Start button
Run
Type in: cmd
In the window that appears type in: ipconfig /all
It will list several line of info that should include all of those.

2006-07-19 07:47:42 · answer #7 · answered by dewcoons 7 · 2 0

For the best answers, search on this site https://shorturl.im/axElv

in a cmd prompt, enter ipconfig /all

2016-04-08 22:12:55 · answer #8 · answered by Anonymous · 0 0

click start then run type in cmd press enter
then type in ipconfig /all on the black dos prompt this will give u all these details.

2006-07-19 07:47:47 · answer #9 · answered by Paultech 7 · 0 0

open a command prompt and type "ipconfig"

or

control panel->network connections double-click your connection, choose the support tab then click "details"

2006-07-19 07:49:16 · answer #10 · answered by Du 3 · 0 0

fedest.com, questions and answers