It is on the drivers side door and it has cracked
2006-07-19 03:00:53 · 16 answers · asked by DOROTHY M 2 in Cars & Transportation ➔ Maintenance & Repairs
dont use supa glue its far too brittle you want an apoxy resin glue that comes in two parts the glue and the hardener mix then clean both surfaces of the handle then coat with glue
push the two together and wipe off anyexcess
takes about 20 mins to set so try clap it together good luck
2006-07-19 15:34:43 · answer #1 · answered by Anonymous · 3⤊ 1⤋
I'm a fan of superglue. What about epoxy? Gorilla Glue might work too...or JB Weld.
Just make sure that if you use epoxy it doesn't eat away at the plastic.
Model car glue is no good b/c it takes forever and a day to dry, you'll have to stand there and hold it. It's not so great in my experience. That's why I like super glue.
2006-07-19 03:02:57 · answer #2 · answered by Corn_Flake 6 · 0⤊ 0⤋
Gorilla Glue Found in Home depot, Loews and WalMart
2006-07-19 03:02:58 · answer #3 · answered by curiosity 4 · 0⤊ 0⤋
i'll suggest superglue, gorilla glue, or JB weld. JB weld is a 2 part compound that hardens like anything when it sets. it's usually used for metal repairs where welding is not an option, but it also adheres to plastics as well. i have used it in both capacities. and after it sets, one can sand it or shave off excesses.
2006-07-19 03:06:38 · answer #4 · answered by Ryan 4 · 0⤊ 0⤋
mitre bond is my favourite, available from all diy stores as a kit one tub of glue and a can of spray activator.
coat one piece of handle with glue spray the other with activator, hold together for a few seconds and job done.
keep your fingers well away though it sticks well!
2006-07-19 11:39:56 · answer #5 · answered by chunky 5 · 0⤊ 0⤋
replace the door handle..glue will not work
2006-07-19 03:06:12 · answer #6 · answered by Anonymous · 0⤊ 0⤋
Model car glue would prolly work best.
2006-07-19 03:02:38 · answer #7 · answered by Anonymous · 0⤊ 1⤋
Epoxy
2006-07-19 03:03:27 · answer #8 · answered by Anonymous · 0⤊ 1⤋
liquid nail will do it just takes a long time to set up , or fast acting j b weld for metal but works on anything
2006-07-19 03:07:59 · answer #9 · answered by ronnstar 1 · 0⤊ 0⤋
gorilla glue
2006-07-19 03:03:48 · answer #10 · answered by arizonaprincess2 5 · 0⤊ 1⤋