I just put a used dell power connect 2016 at my home.
I can get on the internet, but can’t network to my snap server 1100.
I think it’s the old IP address stopping everything.How do I change the IP address on the dell power connect?
I'am running XP.
2006-07-18 13:55:27 · 6 answers · asked by Excellent Credit Service 2 in Computers & Internet ➔ Computer Networking
go to run
type cmd
then type in command prompt
ipconfig /release
then type ipconfig /renew
and press enter
2006-07-18 13:58:29 · answer #1 · answered by livingforjesus231 5 · 0⤊ 0⤋
You have to change it locally if the "old" ip address is outside the range of the router, which is what the problem sounds like. I'm sure your router has some sort of "connected devices" page that shows you everything its assigned an ip to. If its not there, your going to have to change the static ip address to something inside the range of the router.
-- Brady
2006-07-18 21:00:07 · answer #2 · answered by Brady 3 · 0⤊ 0⤋
you have to access the routers internal configuration you may need to contact dell on how to do that because I am not familiar with that type then set the IP address you need
2006-07-18 21:03:04 · answer #3 · answered by Mieog 3 · 0⤊ 0⤋
FYI, Hubs (and switches) don't have IP addresses. Routers do have an IP address.
2006-07-19 00:01:29 · answer #4 · answered by nWo_Spon 3 · 0⤊ 0⤋
Check your DHCP on the server after using your network wizard onn the XP machine.
2006-07-18 21:00:04 · answer #5 · answered by up.tobat 5 · 0⤊ 0⤋
if you hit the run on programs put in cmd and push enter it should come up
2006-07-18 21:29:58 · answer #6 · answered by bassetluv 4 · 0⤊ 0⤋