English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I'm about 400 yds. from the street. Static pressure is good.

2006-07-18 10:55:40 · 7 answers · asked by andy31088 1 in Home & Garden Other - Home & Garden

7 answers

I think you are saying "volume is poor". You can build both pressure and volume for a longer period of time depending on the size of the tank. In order; full flow ball valve, swing check, booster pump, loop with swing check around pump, large tank with pressure switch to control booster pump hi limit. If I could draw it here it would be easier than the explanation. The normal water flow would go around the pump. The tank should be filled about 50% water and the top of the tank will be air compressed by the booster pumping in more water. Note, that the booster pump must run at a slower GPH than the normal flow GPH because you do not want to suck the main feed. This will give more volume for a period of time until the tank is depleted. The bigger the tank the longer period it is and the longer it is for full recovery. We do this all the time in our process control systems.Any questions leave a message.

2006-07-18 11:58:35 · answer #1 · answered by StayBeZe 4 · 0 0

I assume you mean water pressure.

Since water is incompressible, a pressure tank will not be too helpful. Pressure tanks typically are used for compressible fluids (like air). The air goes into the tank slowly and builds up to full pressure, and can come out of the tank quickly (for a brief time) without losing much pressure. It is possible to build a pressure tank for water that has air in it that compresses as the tank is filled with water. If you can keep the air in it (or replenish it) and if you have it sized correctly, that can give you a surge capacity of water while maintaining pressure.

For non-compressible fluids, the analog would be an elevated tank (like a water tower). If you had a tank 150 feet in the air, and you filled it slowly from the street, then you would have a bunch of water ready that would deliver at a high pressure.

If the static pressure is really okay and the flowing pressure is too low, the problem is probably frictional pressure drop in the pipe run to your house. The normal fix for that is a bigger diameter pipe (reduced fluid velocity and less pressure drop), but that may be expensive and difficult.

2006-07-18 11:07:54 · answer #2 · answered by enginerd 6 · 0 0

If you use a pressure tank similar to those used on water well systems, it could help you store sufficient water at higher pressure but it would need to be fairly large.

The use of a small booser pump is probably a better choice.

2006-07-18 12:36:38 · answer #3 · answered by oil field trash 7 · 0 0

You can buy a special pump the will increase your water pressure. We have added one to our master bedroom and it is great, we can now run all 5 shower heads at one time and never loose pressure. Check at Lowe's or Home Depot

2006-07-18 12:10:49 · answer #4 · answered by Anonymous · 0 0

What are you trying to do? What do you need a pressure tank for? Maybe if you give more details to your problem and give us a better idea of what you're trying to do, there might be a good solution out there.

2006-07-18 11:01:43 · answer #5 · answered by virtualyfunny 4 · 0 0

Water pressure? Sewer Pressure? Butt pressure? Propane Pressure? Please be complete in your questions.

2006-07-18 10:59:26 · answer #6 · answered by Anonymous · 0 0

i dunno

2006-07-18 11:01:52 · answer #7 · answered by courtney 2 · 0 0

fedest.com, questions and answers