Drill is approximately 8-10" long and cores the hole in the rubber. The core is then ejected through a half moon cut out on the side of the hollow core drill bit. I know they use a smaller one on snowmobile tracks but this is much larger.
2006-07-18 09:50:57 · 2 answers · asked by iowaguy66 1 in Cars & Transportation ➔ Maintenance & Repairs
You can make one of these (or at least I could) from heat treated tubing.
Have to plan ahead as there is some "spring back" of the material
I am guessing a little,and there are some factors concerning the hardness of the material but around .450 may be correct.
Really need to see the material.
2006-07-18 09:58:26 · answer #1 · answered by ? 6 · 0⤊ 0⤋
Contact McMaster Carr Supply Company.
I think they have it.
If you need a business account to buy, go to any local machine shop, and explain that you need one from McMaster Carr, and perhaps they can get it for you.
Good Luck.
Good Luck.
2006-07-18 11:57:01 · answer #2 · answered by Martin 3 · 0⤊ 0⤋