2006-07-17 13:22:36 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
If you don't want to drop the tank you can cut about a 10 x 10" square in the bed above where the pump is with tin snips.Then order some sheetmetal from JCWhitney and rivet it to cover the hole.That's what I did twice(2 tanks), but I have an older F150,and it was about 10 degrees at the time, so I didn't care.
2006-07-17 13:57:56 · answer #1 · answered by FastEddie 5 · 0⤊ 0⤋
its in the gas tank so you can drop it out of the truck or take the bed off ( bed off is easier) then you remove the lock ring and lift out the pump. make sure your battery is disconnected or it could get ugly....
2006-07-17 20:30:14 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Buy a Chiltons manual and read it.
2006-07-17 20:25:45 · answer #3 · answered by Skypilot49 5 · 0⤊ 0⤋