2006-07-17 12:38:18 · 4 answers · asked by stephen j 1 in Cars & Transportation ➔ Maintenance & Repairs
the headlamp glass are stick to the housing using some kind of glue or silicone which is very troublesome to seperate them apart, and the head lamp glass are breakable easily
2006-07-17 12:42:38 · update #1
The front lens and back case are welded together w/ high strength plastic resin glue. They are not meant to be separated.
If you have water in the lens, drill a small hole in the lens on each side to allow for the water to drain and for it to air dry. After it has dried out seal the two holes with silicon and smear silicon around the seal of the lens and case. Other option would be to buy a new headlight.
If you are trying to clean the lens due to being hazed, fogged, or yellowed. That is not on the inside but is on the exterior of the lens. Takes special treatment to restore the exterior of the lens
2006-07-17 12:43:45 · answer #1 · answered by Anonymous · 4⤊ 0⤋
If you are trying to take them apart for cleaning (inside the lens)...you don't have to take them apart. Remove the entire assembly, remove the bulb and place the assembly face down with the hole for the bulb facing up. Fill the entire headlamp assembly with water and cleaning solution and allow to sit over night. Dump the water/cleaner out and spray into the back with a garden hose. Allow to dry completely and return it to the vehicle.
2006-07-17 13:00:36 · answer #2 · answered by turbietech 4 · 0⤊ 0⤋
The last answer is correct. You cant seperate the glass.
Most of the time the lense is plastic and if it has foged up, use goop and rub it into the lenze and it will clean the lenze
2006-07-17 12:53:18 · answer #3 · answered by goldwing127959 6 · 0⤊ 0⤋
Hammer time
2006-07-17 12:42:04 · answer #4 · answered by Anonymous · 0⤊ 0⤋