PPoE server?

Question

I got a new netgear wireless router for my laptop. When I try and connect it to my Westell Model6100, I do not get an internet connection. I am using Verizon DSL. What could be the problem?

I got told that I need to configure a PPoE server and turn DCHP off. I turned DCHP off put I cannot find the PPoE server settings.

It says PPoE sever not present.

Answer 1

If you are trying to set up a wireless connection, make sure you have DHCP on so you can obtain an IP address, unless you want to specify your own IP, then you don't need DHCP. Secondly, you must configure the router by telling it you have DSL, (i.e. you use PPPoE to connect).

Be sure to enable wireless access, and set an encryption key with whatever encryption type you want to use.

After that is done, check your laptop to see if it is getting an IP address. You should be notified if you are, because the wireless network will be detected. Input your encryption key, and try connecting.

Good luck. And by the way, I am assuming you have Windows XP.

Answer 2

in case you entered your community settings employing the Mac OS X Setup Assistant or community concepts, and in case your ISP does not require you to apply PPPoE, you may desire to already be linked. to benefit, open a internet browser. to connect employing PPPoE: Open internet connect, pick your Ethernet port configuration (named geared up-in Ethernet till you created yet another) interior the toolbar, and click connect. in case you haven't any longer entered your community settings, open community concepts, pick geared up-in Ethernet from the instruct pop-up menu, and enter the settings presented with the aid of your ISP. you additionally can use the community Setup Assistant to circulate into community settings. click "help me" interior the community pane of equipment concepts and persist with the onscreen instructions.

Answer 3

You need to configure it to what they are using. This probably means calling them to find out what that is.