The 4WD does not stay engaged when the button is pushed (lo or hi). Sometimes the light blinks, it will engage momentarily, then disengage, sometimes it will not engage at all. Any suggestions?
2006-07-17 07:11:52 · 2 answers · asked by rme598 1 in Cars & Transportation ➔ Maintenance & Repairs
check the fluid in the transfer case...maybe the soleniod that engages the t-case..maybe the sensor for that soleniod is bad...take it in to be looked at
2006-07-17 07:18:26 · answer #1 · answered by Ryan 4 · 0⤊ 0⤋
you haven't any longer checked your gasoline pump to be sure if its working. could be a fuse, a foul relay, a vacuum leak or possibly a detrimental floor cord. particularly oftentimes injectors have a floor connection close the valve duvet and evidently only like the clamp that secures the cables to the engine block. be sure for it. additionally try one among those propane bottles torches, affordable. place it on the threshold of the air intake, earlier the clear out, open it extensive and function everyone initiate it. it is going to could desire to run. If now no longer you will have not any spark. Carbs are reachable to put in and get working in spite of the shown fact which you additionally can now no longer circulate inspection. I forgot - pull out the pc and open it, look interior for a burnt chip.
2016-11-02 05:36:01 · answer #2 · answered by Anonymous · 0⤊ 0⤋