The bailer tubes are connected and appear clear. The white plastic tubes are visable from looking in the back of the steering nozzle. Bilge pumps works. I need some suggestions on what else to look for. Thanks
2006-07-16 17:17:54 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Boats & Boating
U probably hit a rock and put a hole in the fiberglass bottom of ur sea doo, not too much of a problem, they come right out and i think u can get a another bottom for like 249 bucks, well i would check the hull out some time, thats me, Also sounds like u got a nice ride! I got a yamaha!
2006-07-16 18:06:06 · answer #1 · answered by Xanthous 4 · 0⤊ 0⤋
Probably a leaky shaft seal.
There is probably a plastic cover around it where the impeller shaft goes through the hull. Start the machine on a lift when it is dry and then slowly lower it into the water. It should leak a few drops every 10 seconds or so but I suspect you have a much faster leak than that.
2006-07-17 17:03:21 · answer #2 · answered by eagle1wi 2 · 0⤊ 0⤋
You have a leak somewhere.
2006-07-17 14:41:47 · answer #3 · answered by Anonymous · 0⤊ 0⤋