Dodgeman, how do you bleed the cylinders with 'gravity'?

Question

I actually don't understand about bleeding with gravity. However, I totally agree of replacing 'both' cylinders and it had never occured to me ... thanks

Answer 1

you just open up the bleeder,,place a cup under the slave cylinder,,and keep adding fluid to the master cylinder,,don't let it go dry on you,,and don't open the bleeder all the way open,,just a little is all it takes,,it may take a little while,,once you see clear fluid coming out,,close of the bleeder to the slave cylinder,,and get in the vehicle,,and slowly push the peddle down,,do this a few time,s you will fill the pedal come up,,then you will fill the clutch working,,also it is not necessary to bleed the master cylinder if you do it this way,,your bleeding both of them at one time,,just take your time,,and it will work just fine.,,,PS i forgot to add it takes patience to do this most people get in a hurry,,you can teach this method to your friend,s,,too,,not to many people actually know of this method,,but i been doing it for 35 yrs.

Answer 2

brake cylinders?